Hire the best freelance Simulink expert designers for your company

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different proje... Read more

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different projects with Robert Bosch GmbH company. I have a broad range of skills in Computer-Aided Design (CAD), Computational Fluid Dynamics (CFD), and Finite Element Analysis (FEA). I am proficient at COMSOL, ANSYS, Abaqus, SolidWorks, CATIA V5, Inventor, AutoCAD MEP, Revit, Pro/E [Creo], Matlab, Simulink, Python, Matlab LiveLink, Mathematica, and Dualfoil. SolidWorks Certifications: -Associate and Professional in Mechanical Design (CSWA and CSWP). Please Visit My Portfolio: https://drive.google.com/file/d/1mIvxhUFDAw-8TxiUwuxsUn_8ZLm3oECV/view?usp=sharing

I am Automobile engineer and having good designing experience. I can design parts, components for mechanical and automobile systems. Software skills i. MS Office software – MS Word, MS Excel & Powe... Read more

I am Automobile engineer and having good designing experience. I can design parts, components for mechanical and automobile systems. Software skills i. MS Office software – MS Word, MS Excel & PowerPoint ii. CAD software – CREO, SolidWorks iii. Simulation Software – ANSYS & MATLAB - SIMULINK

Am that good guy every one would like to work with. I like team work. Am fascinated by challenges presented to me and always eager to solve them, No backing down until it is done correctly, that is w... Read more

Am that good guy every one would like to work with. I like team work. Am fascinated by challenges presented to me and always eager to solve them, No backing down until it is done correctly, that is who I am.

. My name is Mohsen Rezaei. I obtained a PhD in Mechanical Engineering– Dynamic, Vibration and Control field from Shiraz University (one of the best ranked university in Iran). I have several years ex... Read more

. My name is Mohsen Rezaei. I obtained a PhD in Mechanical Engineering– Dynamic, Vibration and Control field from Shiraz University (one of the best ranked university in Iran). I have several years experiences in machine design for Iran industries. I completely master in FEM analysis software such as ANSYS and ABAQUS. I also completely familiar with dynamic analysis software, especially multibody dynamic software such as ADAMS. I used all of aforementioned software in industry project. Furthermore, I know all machine design standards, and have expert in CAD modeling in SOLIDWORKS. Python and MATLAB are two programming languages that I am fluent in. I also work with rendering software like Keyshot. Furthermore, I am a little familiar with production line simulation FlexSim. In Iran, I have worked with many companies in the field of production line machinery design. For example, collaboration in the design of BAREZ rubber Co. transmission lines.

Hello, I'm David Rodriguez and I’m absolutely passionate about Mechanical Engineer and CAD Design. I have been working over three years with Solidworks, ANSYS and other CAD and FEA programs. I have de... Read more

Hello, I'm David Rodriguez and I’m absolutely passionate about Mechanical Engineer and CAD Design. I have been working over three years with Solidworks, ANSYS and other CAD and FEA programs. I have develop Projects and Designs, analyze products and structures and being able to develop my career doing what I love. Technical Skills: Advance CAD design Knowledge, including analysis and simulation. SOLIDWORKS MATLAB/Simulink ANSYS Machining (Lathe, mill, basic hands tools, CNC operation) Languages: Spanish and English (I also can help you translating)

I believe that a solution should be simple and cheap, even for a complicated problem. With experience in mechanical design, CAD solid design, gear transmission, chain transmission, HVAC equipment, pip... Read more

I believe that a solution should be simple and cheap, even for a complicated problem. With experience in mechanical design, CAD solid design, gear transmission, chain transmission, HVAC equipment, pipes, ducts, heat transfer, thermodynamics, fluid mechanics and FEM analysis, I am able to provide engineering solution in many different fields. I am also familiar with basic electricity, electronics, control systems, and can write basic code in C language or MATLAB. On a personal note, I take great interest in new developing technologies and high-tech products. I also have hobbies like playing the electric guitar (and music in general), motorsport and cooking.

Our mission is to provide best engineering solutions to our clients considering their technical needs and their clients demands. ProtoTech Workbench offers: -Professional CAD / CAM / CAE Services... Read more

Our mission is to provide best engineering solutions to our clients considering their technical needs and their clients demands. ProtoTech Workbench offers: -Professional CAD / CAM / CAE Services -Computer 3D modeling -Planning, conception and design -Project management and consultancy . In the following industries: -Mechanical engineering -Product design -Development – Research – Innovation -Automotive industry We do: -3D modeling and design -manufacturing optimisation design (mold injection desgin, CNC processing desgin, sheet of metal design etc.) -technical documentation -mechanical engineering and conception (powertrain calculation and design, bearing calculation, mechanism conception etc.) -numerical simulation (Simulink, AMESim) -static and dynamic analysis (FEA) -motion analysis and postprocessing -complete technical reports and manuacturing details ProtoTech Workbench has partnerships in manufacturing area, so we can provide full services from sketch to market.

I am a student of Mechanical Engineering. I am working in a Student Formula team as senior Automotive Designer. I am specially expert in CAD designing and simulation. Besides I am also expert in rende... Read more

I am a student of Mechanical Engineering. I am working in a Student Formula team as senior Automotive Designer. I am specially expert in CAD designing and simulation. Besides I am also expert in rendering and 3D animation. I like to work in Solidworks and for animation and rendering i like Blender and Keyshot. For simulation and analysis I use ANSYS, Solidworks simulation and Matlab simulink and simscape. I have got two awards from my university for CAD designing, one of them is champion and another is 2nd runner up. I have participated in Formula Student Japan 2017 with my team where i am working as an automotive designer. I have also worked in ▒▒▒▒▒▒ as a freelancer. Over all I am a young, energetic, passionate but experienced designer. I am committed to my clients. I like to work as per project and submit the project as soon as possible with satisfying quality.

PhD, Expert in Mechanical Design and Engineering Simulations; Professional mechanical engineer with 12 years experience in mechanical design. I can create the mechanical designs to transform your ide... Read more

PhD, Expert in Mechanical Design and Engineering Simulations; Professional mechanical engineer with 12 years experience in mechanical design. I can create the mechanical designs to transform your ideas from concept to prototypes or fully working machines. I am interested in the design for manufacturing, contains concept components, plastic parts, sheet metal, molding design, 3d printing, welding, bonding and CNC. I can also prepare assembly models, presentation for animations. I have good experience at usage of the softwares of Autodesk Inventor, Autocad, Solidworks, Autodesk Fusion. I use the professional engineering analysis and simulation softwares to perform the Structural Finite Element Analysis (FEA), Multi Body System Analysis (MBS), Rigid Body Dynamic Analysis, Discrete Element Analysis (DEM), Transient Structural Analysis and Explicit Dynamic Analysis. Key Skills: . Computer Aided Design . Engineering Analyses and Simulations . Engineerin Analysis using FEA methods on Ansys . Mutibody System Analysis . Discrete Element Analysis . 3D printing sofwares . Simulink Sim Mechanics . Autodesk Fusion 360 . Advanced techical report writing . Arduino IDE codes . Design of the Graphical User Interface (GUI)

I am a Mechanical Engineer with over 10 years 3D modelling experience in Fusion 360, Solidworks, and various Autodesk Parametric Modelling. MATLAB and Simulink. Ansys CFX Fluid Dynamics and Static Str... Read more

I am a Mechanical Engineer with over 10 years 3D modelling experience in Fusion 360, Solidworks, and various Autodesk Parametric Modelling. MATLAB and Simulink. Ansys CFX Fluid Dynamics and Static Stress Simulations. Experience with Additive (3D Printing) and Subtractive (CAM) manufacturing. Providing the best possible Design Engineering solutions based on sound CAD design, 3D Modelling practices. I believe my portfolio work speaks for itself. Strategy. - Custom design and testing. - Design optimisation based on your requirements. - Will provide a full output of CAD Files (STP, F3D, STL), including Photoshop optimised Renders, Drawings in PDF if required.

I am a student of Mechanical Engineering. I am working in a Student Formula team as senior Automotive Designer. I am specially expert in CAD designing and simulation. Beside this I am also expert in r... Read more

I am a student of Mechanical Engineering. I am working in a Student Formula team as senior Automotive Designer. I am specially expert in CAD designing and simulation. Beside this I am also expert in rendering and 3D animation. I like to work in Solidworks and for animation and rendering i like Blender and Keyshot. For simulation and analysis I use ANSYS, Solidworks simulation and Matlab simulink and simscape. I have got two awards from my university for CAD designing, one of them is champion and another is 2nd runner up. I have participated in Formula Student Japan 2017 with my team where i am working as an automotive designer. I have also worked in ▒▒▒▒▒▒ as a freelancer. Over all I am a young, energetic, passionate but experienced designer. I am committed to my clients. I like to work as per project and submit the project as soon as possible with satisfying quality.

I am an experienced mechanical design and industrial Engineer with a demonstrated history of working in the automotive industry. I have been working for a year as a mechanical engineer and for the la... Read more

I am an experienced mechanical design and industrial Engineer with a demonstrated history of working in the automotive industry. I have been working for a year as a mechanical engineer and for the last year, I have been working with different companies as a design engineer. Major fields of work: Design for manufacturability (DFM processes) Solidworks design & rapid prototyping product development innovative design ideas design documentation from drafts to renders injection moulding designs plastic products 3d printable product design I have done multiple projects on different fields of industry such as research, lean manufacturing, SolidWorks modelling, Matlab GUI & Simulink and ANSYS FEA & CFD.

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for... Read more

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for hardware start-ups, SME's and crowd-funded projects from all over world. Fostering design innovation to optimize functionality, aesthetics and manufacturing costs. Combining radical ideas with technical expertise to make unique and leading products. With expertise in design and prototyping, I am seeking clients who need innovative engineering solution for their businesses. Expertise: * Design innovation. * Concept development. * Product engineering. * System engineering. * Design and cost optimization. * Functional prototyping. * Vendor sourcing for industrial manufacturing.

Mechanical Engineer specialzed in design and calculations. I'm part of a partnership with two more engineer and our main goal is to help companies and individuals with engineering issues that could... Read more

Mechanical Engineer specialzed in design and calculations. I'm part of a partnership with two more engineer and our main goal is to help companies and individuals with engineering issues that could apear in the proccess of development or improvement. We work with several CAD programs and we have a strong experience in design and manufacture.

WORK EXPERIENCE RANGER DESIGN | ENGINEERING DESIGN CO-OP Jan 2017 – September 2017 | Baie-D’Urfe, QC • Created drawings forinstallation guides and engineering changes requested for product enhancem... Read more

WORK EXPERIENCE RANGER DESIGN | ENGINEERING DESIGN CO-OP Jan 2017 – September 2017 | Baie-D’Urfe, QC • Created drawings forinstallation guides and engineering changes requested for product enhancement. • Tracked standard items for projects and engineering changes through resource planning software like, Syteline. • All the CAD changes were done following the industry standards in solidworks. Sheet Metal feature was primarily used to design new parts/prototypes. • Worked on a redesign project of partitions and shelf units for new series of vans. Analysis was done using Solidworks to verify necessary design changes. • Worked on a feasibility study to enhance production and supply chain management. ACADEMIC PROJECTS SYSTEM CONTROLS LABORATORY January 2018 - March 2018 • Modelled a closed loop control system using PID controllers in Matlab Simulink to controlrotary response of flexible joint. • Performance of the system was compared with open loop system and the analysis was throughly documented. BRACKET TOPOLOGY OPTIMIZATION September 2017 – February 2018 • Two similar projects were done on topology optimization using two different analysis software: Abaqus and Solid Thinking. • Redesigned an existing bracket based on given boundary conditions and manufacturing conditions. • Using the analysis software the bracket was optimized for weight and strength alike. AUTOMATIC CASE ERECTOR September 2016 - April 2017 • As part of the Capstone Project, an automatic packaging machine was designed for Hypertec Ciara. • Modelled and designed the pneumatic actuated machine from conceptual phase to final design phase • Stress and deformation analysis were done on the structure using ANSYS, to verify weakness in design and make enhancements accordingly. • Presented feasibility and structural integrity of the design to the client. JET ENGINE ACCESSORY GEARBOX January 2016 - April 2016 • Designed an accessory gearbox following the AGMA standards using Solidworks. • Gear, lubrication and bearing analysis calculations were done using excel and Matlab.

To achieve high career growth through a continuous learning process, keep myself dynamic, visionary and competitive with the changing scenario of the world and to contribute for the growth of organiza... Read more

To achieve high career growth through a continuous learning process, keep myself dynamic, visionary and competitive with the changing scenario of the world and to contribute for the growth of organization.

I am an electrical engineer with experience in designing electronic solutions for rugged robotic applications. This includes PCB designs, cable harnesses, motor and feedback selection, and overall sys... Read more

I am an electrical engineer with experience in designing electronic solutions for rugged robotic applications. This includes PCB designs, cable harnesses, motor and feedback selection, and overall system architecture. I also have experience designing mechanical components such as rugged enclosures, heat sinks, etc. My skills span the full design process, from initial concept and requirement generation to final product design and manufacturing.

I am a mechanical designer. My areas of expertise include product designing, 2D/3D modeling and programming. My PhD project is collaborative control for multi-robots which includes 13 degrees of freed... Read more

I am a mechanical designer. My areas of expertise include product designing, 2D/3D modeling and programming. My PhD project is collaborative control for multi-robots which includes 13 degrees of freedom. I have years of experience of mechatronic devices design and develop. I can transform your brilliant idea s into actionable plans.

I am an enthusiastic and experienced Mechanical Engineer with skills in Mechanical Design & Automotive Engineering with 2+ years experience. Being a passionate engineer, I enjoy solving different engi... Read more

I am an enthusiastic and experienced Mechanical Engineer with skills in Mechanical Design & Automotive Engineering with 2+ years experience. Being a passionate engineer, I enjoy solving different engineering problems and thus contribute to the fast evolving World. I believe my strong analytical and problem solving skills are built from my education background and are being further developed and built on continually during my current projects. My software skills include CATIA V5, MATLAB, OpenFOAM, Octave, Simulink, Simscape and ANSYS. My expertise lies in Mechanisms & Machine Design, Automotive Powertrains, Aerodynamics, CFD, Thermodynamics & Heat Transfer and Vehicle Dynamics

I have graduated from the Mechanical Engineering Department of the National Technical University of Athens (Diploma equivalent to MSc). My diploma thesis was about “Design and Analysis of a Wave Energ... Read more

I have graduated from the Mechanical Engineering Department of the National Technical University of Athens (Diploma equivalent to MSc). My diploma thesis was about “Design and Analysis of a Wave Energy System”. The system, named “Wave Winch”, is patented and it has gained several distinctions awarded in national and worldwide competitions. I have experience on system engineering, and mechanical design using contemporary CAD/CAE software tools such as SolidWorks, Autodesk Inventor, ANSYS Workbench, Matlab and Simulink. I am working as a freelancer since 2013 and I have work experience in CAD modelling, engineering simulations, digital prototyping and 3d printing. Furthermore I am familiar with subjects such as computer programming, optimization algorithms. Additionally, during my studies I have attended courses concerning economics, business administration, logistics, operational research, project management, financial engineering and feasibility studies especially for plants exploiting variable renewable energy sources.

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and... Read more

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and 6 axles vehicle. -Already available analytical approaches were studied: Elastic Curve Equation, Three-Moment Equation, and Beams on Elastic Foundation. - Experimental Rig setup was devised and results were compared with the computational methodology. - A research paper of this study was published in IBCAST-2016 Conference. b. FEA Study of Crane Out trigger Mat -Developed a finite element analysis procedure for simulation of stiffness behavior of foundations under large-scale loads. -The study was required for criteria building of ATPs for safe handling of the crane and its outriggers. -It was also published in the International Conference on Structural Dynamics & Vibrations (ICSDV-2014). c. Mathematical Modeling of 8 Axle Vehicle Steering - Mathematical modeling in MATLAB/SIMULINK for an eight- axle steering system to simulate the behavior while turning for 6DOF Steward Platform Motion Simulator. Mechanical Design Projects a. Landing Gear of a Light Aviation Grade RC Plane (Ongoing Project) - Mathematical modeling of landing gear placement and finalization of its configuration. - Mechanical component design of the nose and main landing gear deploying mechanisms with locking and unlocking arrangements at deployed and retracted positions as per QMS of AS-9100C. - Closing/Opening of landing gear stowage bay door with the same EMA of the nose landing gear. b. Mechanical Design - Modeling and designing of various mechanical structures/mechanisms using CAD modeling software. - Preliminary and detailed engineering calculations at the conceptual and detailed engineering phase of the project. -Validation of modeled systems through the aid of FEA tools (ANSYS/ABAQUS). -Taking projects through the Phases of Product Development Cycle (PDC) as per QMS of ISO or AS- 9100C.

I am a full time Mechanical Engineering student at the University of Texas at Tyler. I came to cad crowd to use my experience in 2D/3D modeling software to gain resume building work experience. Read more

I am a full time Mechanical Engineering student at the University of Texas at Tyler. I came to cad crowd to use my experience in 2D/3D modeling software to gain resume building work experience.

I am Shivam Jha pursuing BE in Mechanical Engineering at Sinhgad Academy of Engineering Pune Affiliated to Pune University. I am in final year of engineering securing 8.824 CGPA aggregate pointer & al... Read more

I am Shivam Jha pursuing BE in Mechanical Engineering at Sinhgad Academy of Engineering Pune Affiliated to Pune University. I am in final year of engineering securing 8.824 CGPA aggregate pointer & also been a part of formula student car team where we design & manufacture the formula Student car for events such as Formula Bharat, SAEINDIA SUPRA, FFS, FSG, FSJ & many more. My job there is the CAE & CHASSIS HEAD. I also won Award for CAE in SAEINDIA SUPRA 2019. I had been experiencing production & Design in the same team since three years. Also done certified courses of Ansys workbench, CatiaV5, Matlab Onramp, Simulink Onramp & Digital Marketing. Work experience as an intern in Textile Industries, Indian Railways, Cement Production Plant, Mechanical Design Forum, Solar Startup & Thermal Power Project Rajasthan. Published research paper on "Design and Analysis of a Sprocket-Hub Assembly Design" & "Analysis of Hydrogen Free Piston Linear Generator" in IJRESM. Also published research paper on “Design and Analysis of Point Absorber Wave Energy Converter” & “Design and Analysis of Snake like Robot”. Key Skills:  Cadd modelling : Surfacing, Drafting, Steelmetal Modeling, Wireframe Modeling, Ergonomic Modeling & Analysis, Cadd Assembly, Cad Rendering, Cad Model Assembly Rendered Animations.  Cadd Analysis : Model Analysis, All Meshing Types, Static Structural Analysis, Static Thermal Analysis, Transient Thermal Analysis, CFD, CFX, Explicit Dynamic Analysis, Transverse & non Transverse Analysis, Non Linear & Linear Analysis, Vertical Testing Validations. Software Expertise - AutoCAD, Catia V5, Ansys workbench / Apdl, Matlab & simulink, Creo. Publications: https://issuu.com/jha1880/docs/cae_design_report_shivam_20jha_modified/s/10571423 https://www.ijresm.com/articles/design-and-analysis-of-a-sprocket-hub-assembly/ https://www.ijresm.com/articles/design-and-analysis-of-hydrogen-free-piston-linear-generator/ http://shabdbooks.com/gallery/spl-293.pdf http://shabdbooks.com/gallery/spl-292.pdf Work Samples : Link of CFD Sample Work - https://drive.google.com/drive/folders/1tkOmYdMwaKJ8GPIagbGWbADgJuZ9lCI0?usp=sharing Catia & AutoCAD Sample Link - https://drive.google.com/drive/folders/1XcY69Dh-Pjow4o38VW0XutRlbii7c_Ij?usp=sharing

Mechanical engineer with an extensive knowledge of the field and strong technical background. Experienced in solving engineering problems using skills like - Computational Fluid Dynamics (CFD), Struct... Read more

Mechanical engineer with an extensive knowledge of the field and strong technical background. Experienced in solving engineering problems using skills like - Computational Fluid Dynamics (CFD), Structural Design, Analysis(FEA) and Optimization of complex systems, Research and Development (R&D), 3D modelling using a number of software's etc. ⚙software expertise include: ✔ANSYS modules ✔CATIA V5 ✔SolidWorks ✔MATLAB ✔Abaqus ✔Simulink ✔Python ✔CREO ✔HyperWorks ✔Hypermesh ✔Spaceclaim ✔DesignModeler ✔LS-dyna ✔Staad Pro I will do my best to complete your projects perfectly with high responsibility and passion. You will get wonderful results. Thank you for visiting my profile

I am a recent graduate from the University of Nevada, Reno in Mechanical Engineering looking to launch into the freelance industry as a CAD Designer. I have 1.5 years of experience as a CAD Designer/F... Read more

I am a recent graduate from the University of Nevada, Reno in Mechanical Engineering looking to launch into the freelance industry as a CAD Designer. I have 1.5 years of experience as a CAD Designer/Freelance Engineer. I helped design a Drone Docking Station in SolidWorks, Battery Powered iPhone and iPad cases and many other projects during school. Current Engineer in Training(EIT).

Greeting: I well come you to my profile. Hope you are doing great. I have about 20 Years experience as Test Inspector of Electrical Protection & Instrumentation at EHV System of Grid S... Read more

Greeting: I well come you to my profile. Hope you are doing great. I have about 20 Years experience as Test Inspector of Electrical Protection & Instrumentation at EHV System of Grid Station Operation and Thermal Power Station. I have professional expertise in following; 1- Auto CAD Electrical 2d & 3d. 2- MATLAB Programming & SIMULINK. 3- PS CAD V5. (Simulation) 4- Electrical Drawings Designing & Drafting. 5-Electrical Protection & Instrumentation (Relays & Temperature Equipment) Circuits Troubleshooting and Verification. 6- Relays installation , Commissioning , Testing and Circuit Designing , Drafting and Troubleshooting. 7- MS Office (Word , Excel , Power Point , Visio). All work will be done with fully satisfaction of the employer with free mockups and unlimited revisions.

I am skillful Mechanical engineer. I am experienced in designing mechanical devices and systems. The softwares I am experienced with are: - (CAD, CAM, CAE) softwares: SolidWorks, Autodesk Inventor,... Read more

I am skillful Mechanical engineer. I am experienced in designing mechanical devices and systems. The softwares I am experienced with are: - (CAD, CAM, CAE) softwares: SolidWorks, Autodesk Inventor, Fusion360, Ansys (CFD & FEA). (Control and Simulation) softwares: MATLAB, Simulink, Octave, LabView. I am very flexible, work can be redone and edited till customer is satisfied with the final result. Customer satisfaction is my highest priority whether in means of work quality, time or expenses. I am available on daily basis, very responsive and communicative.