Hire CAD Drawing Designers near England, United Kingdom

Mechanical Design, 3D CAD Modeling, 3D modeling, 2D CAD Drawings, 3D Printing. With over 35 years experience in mechanical design, drafting and engineering, covering industries such as computer and... Read more

Mechanical Design, 3D CAD Modeling, 3D modeling, 2D CAD Drawings, 3D Printing. With over 35 years experience in mechanical design, drafting and engineering, covering industries such as computer and computer related products, mobile phones, automotive and rugged electronics, as well as various other high tech electronic and consumer based products. Over 25 years using 3D CAD including the last 6 years using SolidWorks. 3D printing available using Zortrax M200 and Formlabs' Form 1+ for small prototype, or for just general 3D printed items. Please see www.aardvark3d.co.uk.

Freelance designer based in the UK, with 7 years design experience in the yacht and high end property sector. Carrying designs from intial sketch generation through to photo realistic renders and... Read more

Freelance designer based in the UK, with 7 years design experience in the yacht and high end property sector. Carrying designs from intial sketch generation through to photo realistic renders and engineering packages.

I am a Structural Design Engineer based in London, U.K. I have over 4yrs experience in the industry, mainly working on residential projects in central London. I have worked for 3 of the top... Read more

I am a Structural Design Engineer based in London, U.K. I have over 4yrs experience in the industry, mainly working on residential projects in central London. I have worked for 3 of the top Structural Engineering firms in the city on projects of various sizes. I have strong structural design capabilities in steel, concrete, timber and masonry and also have excellent project management skills and interpersonal skills. Services: - Structural sketches - Structural CAD drawings - Outline structural designs - Final detailed structural designs

I am a recent graduate from Oxford Brookes University with 4+ years training using Solidworks, CATIA V5, and the corresponding simulation software with each program. I am starting my Master's... Read more

I am a recent graduate from Oxford Brookes University with 4+ years training using Solidworks, CATIA V5, and the corresponding simulation software with each program. I am starting my Master's degree in October where I am looking to achieve a first in Engineering. I have the ability to provide the following services in either CATIA or Solidworks: - Reverse engineering components from older technical drawings - Producing models and engineering drawings for new designs - Run simulations with in these respective softwares and producing reports In addition I have had extensive training in Geometric Dimensioning and Tolerancing and extensive training within CATIA and Solidworks throughout my university career so far and within my industrial experience.

NIKOLAS BARTLEY 63 Holmesdale Road, Burgess Hill, West Sussex, RH15 8EF. Home telephone: 01444 250449 Mobile telephone: 07917026620 ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ PROFILE An HND... Read more

NIKOLAS BARTLEY 63 Holmesdale Road, Burgess Hill, West Sussex, RH15 8EF. Home telephone: 01444 250449 Mobile telephone: 07917026620 ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ PROFILE An HND qualified Mechanical Engineer who is enthusiastic, highly motivated, proactive and resourceful, who understands the importance of time management and prioritisation of work. KEY SKILLS Strong communication skills at all levels whilst exercising tact and diplomacy. Practical ability in managing tasks, solving problems & applying creativity. The capacity to work on my own initiative or as a team member. Use and application of personal computers. A methodical approach to fault diagnosis. Ability to perform well under pressure. PROFESSIONAL QUALIFICATIONS AND EDUCATION 1996 to 1998 University of Brighton- HND (Educational Excellence) In Mechanical/Manufacturing Engineering The HND course was undertaken whilst working nights to support myself financially. 1991 to 1993 Guildford College of Technology- OND & City & Guilds In Automotive Engineering 1983 to 1987 Rodborough School of Secondary Education- O levels In Maths, Physics, Technical drawing, English, History & Art CAREER HISTORY (Latest First) 2010 to Present-Full Time Parent/Part Time self employed CAD Draughtsman Raising my 3 & a half year old twin girls. (Due to child care costs matching potential net salary) Recently started doing part time private CAD drawings/plans mainly for the domestic building industry part time whilst children at Pre school for 15 hours per week. 2004 to 2010-Parker Hannifin To design & create layout & construction drawings of hydraulic power unit tanks using AutoCAD, Autodesk Inventor & Excel Spreadsheets. To assist & advise on streamlining the drawing office procedures. 2001 to 2004 Bio-Bubble Ltd, Emsworth Yacht Harbour, Thorney Road, Emsworth Design / Development Engineer To design water treatment plants for many different sites using AutoCAD 2D & 3D. Solving design issues with clients and sub-contractors by phone and meetings. Organising design/drawing office to ISO 9001 standards. 2000 to 2001 Eaton Hydraulics, New Lane, Havant, Hampshire Research & Development Technician Modifying & testing existing & prototype hydraulic components. Setting up & calibrating testing instrumentation, and using oscilloscopes. Data processing & manipulation of formulae using Microsoft Excel. Technical report writing. 1998 to 2000 Ricardo Consulting Engineers Ltd, Shoreham-by-Sea, West Sussex Engineering Test Technician Setting up & calibrating engine testing instrumentation, and using oscilloscopes. Prototype internal combustion engine noise, vibration & harshness testing. Prototype internal combustion engine design & validation testing. Data processing & manipulation of formulae using Microsoft Excel. Technical report writing. 1996 to 1998 Leisure Security Services Ltd, Aldershot, Hampshire Part Time Licensed Door Supervisor (To support full time HND studies) 1994 to 1996 Autela Components, Burgess Hill, East Sussex Assistant Branch Manager Maintaining stock levels of automotive components. Coordinating & organising delivery drivers and shop staff. Preparing orders from motor vehicle dealerships & the automotive trade. Creating sales & promoting special offers. Covering for the manager in his absence. 1993 to 1994 Reece Brothers Restoration, Aldershot, Hampshire Motor Vehicle Technician Restoring classic cars to show room conditions. Rebuilding engines & diagnosing faults with ignition & fuel injection systems. Rebuilding & repairing gearboxes. Welding corroded chassis. Diagnosing & repairing electrical faults. 1991 to 1993 Winterton Arms, Chiddingfold, Surrey Part Time Barman (To support full time OND studies) 1987 to 1991 Fox’s of Guildford, Guildford, Surrey Apprentice Mechanic Servicing & repairing vehicles of all makes. ACTIVITIES AND INTERESTS Interests include keeping up to date with engineering developments through Incorporated Engineer newspapers and journals. Technology & Computing. Quantum Physics.

I am highly skilled and experienced having been working with CAD for over 10 years. I've worked on multi-million pound projects such as Crossrail, and i've worked with huge international companies... Read more

I am highly skilled and experienced having been working with CAD for over 10 years. I've worked on multi-million pound projects such as Crossrail, and i've worked with huge international companies such as Tesco, Harrods, Vinci and Alstom for many years.

As an independent engineering materials consultant, I offer a consultancy service which can range from attendance at a few meetings to longer term contracts attached to your project. I also... Read more

As an independent engineering materials consultant, I offer a consultancy service which can range from attendance at a few meetings to longer term contracts attached to your project. I also offer engineering design CAD services; aimed at SMEs and start-ups who may not have the capability in-house, but need to produce CAD drawings of components and assemblies for manufacture throughout the project life-cycle. With the flexibility that independence offers, my services can be tailored to precisely what you need, and for how long you need them; making it a  cost-effective alternative to hiring specialists or fixed term contractors. I am happy to quote for complete tasks, an hourly rate, or on a "call-off" contract basis against an overall plan and cost limit. Materials Selection Materials selection should be performed in the earliest stages of the design cycle but is often overlooked, causing project delays with associated increased costs later. Selection of the most appropriate material depends on many factors and several outside the usual parameters of strength, toughness, etc. In product design the main goal of material selection is to minimize cost while meeting product performance goals. Systematic selection of the best material for a given application begins with the required properties.  These should be defined in the Product Design Specification (PDS), with no reference to materials at the PDS stage. For example, a thermal blanket must have poor thermal conductivity in order to minimize heat transfer. Systematic selection for applications requiring multiple criteria is more complex. For example, a rod which should be stiff and light requires a material with high Young's modulus and low density. If the rod will be pulled in tension, the specific modulus, or modulus divided by density, [E / ρ], will determine the best material. These properties also have to be ratified against the cost of the material and available production techniques for shaping and forming. A systematic approach to materials selection will be applied to your project, which will ensure that all design parameters are satisfied while minimising costs to the project. CAD CAD has become the "norm" for drafting in the engineering arena. The advantages of using CAD are numerous, but the key advantages are the flexibility and ease at which new designs can be turned into drawings and existing designs can be modified during the design process.  These make CAD an essential tool in the engineers box. In the product development space, the extended features in modern CAD software are also useful visualise a product. Overall, CAD is a tool for increasing productivity, improving quality, and reducing costs. When combined with Computer-Aided Manufacture (CAM) via CNC machining equipment and, more recently, 3D printing technology, CAD can give a company options to send their model data to suppliers to get things made remotely, with just a phone call or two to confirm details, etc.  This advantage is able to reduce costs by allowing suppliers to be situated anywhere in the world. I have three CAD packages that can be deployed on your project, depending on the project budget.  I use AutoCAD and Salome, the latter used to create meshes for later analysis by FEA. So, depending on your needs, whether it is a one-off paper-design-to-CAD exercise or a longer term product development exercise, I have an efficient solution. FEA For engineering designs, Finite Element Analysis (FEA) is a natural follow-on from CAD. FEA allows the design (or modified design) to be analysed against its performance parameters without the expense of producing working test items. Modern FEA software includes a graphical user interface for model creation, meshing and post-processing.  the calculation engine is usually "hidden" from the user and will require very little interaction, save to check the model parameters and solution accuracy. Load cases can be applied to the design and the response of the component analysed. These analyses can be fed back into the design, which can be modified accordingly. The design - analysis cycle can then be repeated as often as necessary before a working test device or prototype is made. The use of modern CAD and FEA tools makes it very quick and cost-effective to iterate design modifications and analyse them. For FEA, I use "Code-Aster" on a 64-bit Linux platform.  Code Aster is an FEA tool developed and used by French energy company EDF.  It is highly versatile and is capable of numerous post-processing options to allow detailed analysis of your design.

Born in Italy and graduate in Florence, I'm an Architect based in London. After working as an Architect I decided to follow my passion for 3D visual arts and am now operating as an interior... Read more

Born in Italy and graduate in Florence, I'm an Architect based in London. After working as an Architect I decided to follow my passion for 3D visual arts and am now operating as an interior designer and 3D visualiser. I am specialised in interior bespoke furniture design, interior layout & material solutions and architectural renderings.

Logical, driven, thoughtful, hard working and goal oriented; Lots of steelwork experience in CAD; Simple and big projects, jobs in teamwork, PvP to meet Your needs. Read more

Logical, driven, thoughtful, hard working and goal oriented; Lots of steelwork experience in CAD; Simple and big projects, jobs in teamwork, PvP to meet Your needs.

I am a UK based architectural designer with a passion for all aspects of architectural design. I have skills in turning sketches into 2D CAD drawings, modelling 3D ideas, realistic architectural... Read more

I am a UK based architectural designer with a passion for all aspects of architectural design. I have skills in turning sketches into 2D CAD drawings, modelling 3D ideas, realistic architectural visualisations and much more in between. Feel free to send me a message to discuss your project and I hope we can work together soon!

I'm a recent mechanical engineering graduate and am also Certified as a SolidWorks Associate in Mechanical Design. Read more

I'm a recent mechanical engineering graduate and am also Certified as a SolidWorks Associate in Mechanical Design.

With over 15 years experience working in both architectural and building surveying practices throughout the UK, on projects from simple single storey extensions, to multi-million pound commercial... Read more

With over 15 years experience working in both architectural and building surveying practices throughout the UK, on projects from simple single storey extensions, to multi-million pound commercial and residential developments, I am well placed to assist you with architectural CAD services for your project, no matter the size. My remote CAD drafting services are provided to both individual clients, as well as ongoing services to architectural professionals, contractors, developers, and teams, across the UK and abroad. My experience includes the preparation of hundreds of project drawings and supporting documents for Planning Applications, Building Regulations, Construction Design & Detailing, Tender Drawings, and 3D Models. In addition to these services, I can also prepare Land Registry Compliant Lease & Title Plans, prepare specifications and construction contract documentation, and advise on The Party Wall etc. Act. My qualifications include a BA (Hons.) degree in Architecture, as well as a post graduate diploma in construction surveying, and I have been a Chartered Building Surveyor for over 8 years, all of which has equipped me with both an understanding of architectural design, and crucially, of the construction technology of buildings, both old and new, including compliance with the Building Regulations. You can find out more by visiting extensionplan.co.uk.