I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine... Read more

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months of experience in automation systems, in which my main focus was on 3D interface systems. I thoroughly enjoy working on projects that require me to stretch and expand my skills to new limits. I am always looking for a way to continue growing the knowledge in my field and gaining new skills.

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing... Read more

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory owner looking to improve your production systems and manufacturing methods, I can help you. Having a great deal of first-hand experience operating machine tools allows me to fully embrace the principles design for manufacturing and assembly resulting in practical and cost-effective designs. I am passionate and proud to be a Mechanical Engineer with extensive knowledge of engineering principles, theories, specifications and standards. My goal is to employ sound engineering, design and management principles to allow South African companies to become competitive and recognized in the global marketplace. This is not merely a platitude, but a sincere desire to foster a culture within companies to develop and maintain a World Class Standard of excellence. The services I can offer include: • Product conceptualization and industrialization (from an idea to reality) including design reviews and failure modes and effects analysis (FMEA). • 2D and 3D computer aided design (CAD). • 3D rendering and animation. • Design calculations and finite element analysis (FEA). • Access 3D printing and machine shop for prototyping and production. • CNC Lathe and Mill Programming (depending on machine controller). • Manufacturing process and efficiency improvements. • Business process improvement. • Production workflow and routing including datapacks for each production stage detailing methods and Inspection requirements. So, if it is a simple 2d drawing you require, a full product industrialization service or you are looking to improve your manufacturing systems and/or business processes, reach out and contact me.

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs Read more

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled... Read more

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3D CAD (Autodesk Inventor and Autodesk Fusion 360) and am proficient in working from and producing 2D AutoCAD drawings. I also have experience in rendering and simple animations of both the finished boat or custom stand-alone components and systems. My previous structural projects have included a full 3D model, drawing pack and nested cut files for a 15m ocean research catamaran. As well as numerous custom components where an off-the-shelf option was not suitable. While I am not a naval architect, I have partnered with a company that can provide all the necessary structural calculations. Plug and mould design for GRP boats is another area I particularly enjoy, and have extensive experience in. In addition to design, I am highly skilled at the communication and collaboration of all aspects of the design process. This has been aided by cloud-based CAD software such as Fusion 360, which facilitates the sharing of information and keeping track of design changes in real time. In addition to standard boat design work I particularly enjoy smaller custom R&D projects that require more creative solutions within a given set of parameters. My approach to design is one of simplification, and always working within the limitations of the project with regard to materials and fabrication techniques. The ideal design is usually the simplest solution that can satisfy all criteria.

Im 20 years old.Im currently a student at Academy IDT studying multifunctional draughting.I use Autodesk software (Solidworks,Autocad,Revit). I would say out of personal experience that Im good at... Read more

Im 20 years old.Im currently a student at Academy IDT studying multifunctional draughting.I use Autodesk software (Solidworks,Autocad,Revit). I would say out of personal experience that Im good at civil draughting,Architectural draughting and also 3D modeling.I have a great passion for Architecture since highschool thats why I have decided to start freelancing to build my portfolio.I also love designing andI love working with people.With this skill set I think that I'll be your perfect candidate for the job.Im fast,accurate and never miss a deadline.

1. Mechanical Machine Design and detailing 2. Material Selection and Heat Treatment 3. Bulk Material Handeling system design Read more

1. Mechanical Machine Design and detailing 2. Material Selection and Heat Treatment 3. Bulk Material Handeling system design

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting. Read more

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting.

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft... Read more

I am a highly motivated and curios Engineer! I have a masters degree in Mechanical Engineering and 8 years experience in Mechanical and Electrical Hardware. My experience ranges from aircraft electronic hardware and control systems to film-quality robotic arms. I have also been responsible for multiple products from their concept phase all the way to production and integration. I have always had a love for electronics and creating and for Mechatronics or Robotic projects. I am a good communicator with a wealth of knowledge and ample CAD experience (Autodesk Inventor and Fusion 360, SolidWorks, Siemens nX).

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual... Read more

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Arts Gallery (AVA) in Cape Town as well as at the University of Johannesburg Art Gallery, in addition to featuring in the Visi Magazine.

Professional manner with a Masters degree in Mechanical Engineering. I have over 10 year of experience in various fields including design engineering, industrial electric heating and control,... Read more

Professional manner with a Masters degree in Mechanical Engineering. I have over 10 year of experience in various fields including design engineering, industrial electric heating and control, plastic molding, medical devices and technical sales. I have been a key team member in projects taking products from concept to production as well as value engineering projects in the manufacturing space.

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make... Read more

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make your Dream Project a reality by using my manufacturing design experience to develop your fantastic product cost-effectively. I design parts often used in the Professional and Manufacturing environment. Whether it is a single part of an assembly of numerous components, I will add value to your business. I have a crossover of skills that make me very effective. Here are some of my essential skills: • 3D Modeling (Solid Works 2021) • Manufacturing Drawings & Specifications • Design for Manufacturing (DFM) • Design for Assembling (DFM) • 3D Printing & Additive Manufacturing • Manufacturing Jiggs • Problem Solving • Critical Thinking About Me: I’m an honest person that enjoys working in the manufacturing environment that genuinely wants to help others around me. Working in this industry for the last 17 years has inspired me to start my Freelance with a new vision as a free-thinking individual to pursue new interests and add value to my customers. Productive collaboration drives me and gives me energy. I’ll take the time to gain a personal interest in your business, which will help me make significant contributions. I’m incredibly innovative, dedicated and pride myself to service excellence and attention to detail Have a nice day! Kobus Fourie Your innovative CAD Partner.

I am a passionate designer with a keen eye for detail and a love for all things design. With 6 years of experience in the industry, I have had the opportunity to work on a diverse range of... Read more

I am a passionate designer with a keen eye for detail and a love for all things design. With 6 years of experience in the industry, I have had the opportunity to work on a diverse range of projects, from art-orientated projects to structured client-orientated design projects, personally and collaboratively. My goal is to create innovative and visually stunning designs that meet clients’ objectives, evoke emotion, and engage the audience. I believe that design has the power to transform the world. I am constantly inspired by the intersection of art and functionality, and I strive to create designs that are not only aesthetically pleasing but also purposeful and user-centric. I am a firm believer in the importance of research and understanding the target audience, as it allows me to tailor my designs to their needs and aspirations. When it comes to approaching design projects, I believe in a collaborative and iterative process. I enjoy working closely with clients, understanding their goals and aspirations, and translating them into visually compelling designs. Throughout the project, I prioritize effective communication and feedback to ensure that the final result aligns with the client's vision and exceeds their expectations. Areas of Expertise: - Concept Development - Research & Development - Sketching - 3D Modeling (CAD) - Prototyping - Basic Electronics & Coding - Mould Design - Digital Rendering - Brand Design & Development - Technical/Manufacturing Drawings

I come from a multidisciplinary background with over 25years experience in CAD draughting/ drafting and a solutionist attitude. I have worked alongside many Engineers and Architects, local and... Read more

I come from a multidisciplinary background with over 25years experience in CAD draughting/ drafting and a solutionist attitude. I have worked alongside many Engineers and Architects, local and international on various projects, in the consulting engineering services and mining environment throughout my career. The past couple of years I've been involved in R&D, manufacturing and prototyping.