"Hurt Feelings" - Sign Holder / HandlesBlind
in
CAD Design
held by
johnathanl
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
***Summary/Background:***This is a niche product for individuals in the car racing scene that is a single handed sign holder with bespoke slogans that the passenger will hold out the window after racing an opponent. Currently as per the pictures, I need something a little more than a wooden handle.
Open to any and all ideas and design types in regards to the evaluation criteria below.
Will be completing and building prototypes using a CNC mill and lathe, will require project to have STEP files or similar.
Wants:
***Evaluation Criteria:***- Logo must be prominent on both sides of the handle.
- Must be able to fit a 6x12 sign in landscape that will have two holes at the centerpoint 0.30”/7.62 mm from the top and bottom with M6 screws. If you can design some sort of "quick detach/quick attach" method for this sign handle, you get extra points.
- Aesthetics, design and efficiency of manufacturing are priority. This is intended to be marketed to higher end clientele.
- Design must be automotive racing themed. It must have class and elegance. (Think Lamborghini or Ferrari "lines")
- Must have a hole/slot at the bottom of the handle for a wrist strap.
- Bonus points to a handle that can be manufactured without multiple parts. (Handle is one whole part, not cut into 2 or 3 pieces that need to be assembled.
- Max length of handle should be 12 inches long and no larger than 2 inches in diameter
- The lighter the handle, the better.
- Handles should have a recessed groove where sign plaques (12x6 inches, 5 mm deep) can be installed without catching on moving objects.
Don't Wants:
Do not want this to "look" cheap, even if it is "cheap"I don't want a single piece of 1x2 aluminum bar with 2 holes at the top.
Company Logo:
Yes
Prepaid PrizeEntries
#17 Sign Board Slit With grooved handle
by SamSingh
#21 Sign Holder
by sanju
Declined
#24 Sign board carrier.
by SamSingh
#28 1st Concept Design Sign Holder
by Chaniago
Declined
Download Files
- Rendering Images 2020 — 1-General-Arrangement
- Rendering Images 2020 — 2-SW Iso View
- Rendering Images 2020 — 3-SE Iso View
- Rendering Images 2020 — 4-Back View
- Rendering Images 2020 — 5-Holder Only
- Rendering Images 2020 — 6-Logo View
- Rendering Images 2020 — 7-Ball Plunger
- Adobe Reader 2020 — 8-CC-CHG-42-0 Sign Holder Handle
- STEP/STP 3D Modeling 2020 — 9-1st Concept Design Sogn Holder
#40 Mechanism
by HBC DESIGN
#16 Sign Board Slit With grooved handle
by SamSingh
#63 "Hurt Feelings" - Sign Holder / Handles
by REDA
Download Files
#74 Hurt Feeling Razor Edge
by Sisoje
#73 Plug and Play Board
by GilarPanduA
#72 Concept 1
by studio701
Download Files
- STEP/STP 3D Modeling — racesign 1
- STEP/STP 3D Modeling — racesign 2
- STEP/STP 3D Modeling — racesign 3
- STEP/STP 3D Modeling — racesign 4
- STEP/STP 3D Modeling — racesign 5
- STEP/STP 3D Modeling — racesign 6
- STEP/STP 3D Modeling — racesign 7
- STEP/STP 3D Modeling — racesign 8
- STEP/STP 3D Modeling — Race Sign
#71 Sign Holder / Handles
by sherifelsheikh
#70 Hurt Feelings" - Sign Holder / Handles Design 01
by ahmadnazree
Download Files
#69 Hurt Feelings" - Sign Holder / Handles
by STRAK_design
Download Files
#68 first one - more renderings
by Creative Paul
Download Files
#67 first one
by Creative Paul
Download Files
#66 Shift Grip
by joek
Download Files
#65 "Hurt Feelings" - Sign Holder / Handles
by REDA
Download Files
#64 Cobra Concept V1
by InnovativeDesignSolutions
Declined
Download Files
- Autodesk Inventor 2021 — Cobra Concept V1 GunMetal - Copy
- Rendering Images — Cobra Concept Render 1
- Rendering Images — Cobra Concept Render 2
- Rendering Images — Cobra Concept Render 3
- Rendering Images — Cobra Concept Render 4
- ImageJ — Cobra Concept Render 5
- ImageJ — Cobra Concept Render 6
- Rendering Images — Cobra Concept Render 7
#62 "Hurt Feelings" - Sign Holder / Handles
by REDA
Download Files
#61 Sign Holder
by apajic
Download Files
#60 Sign Holder
by apajic
Download Files
#55 Hurt Feelings" - Sign Holder / Handles
by STRAK_design
Download Files
#54 Hurt Feelings/ Sign Handle Design organic concept
by Muhammad Jazim Usama
Download Files
#49 Hurt Feelings/ Sign Handle Design
by Muhammad Jazim Usama
Download Files
Discussion
@ecooco I already have a good design and finalist for what I need. Thanks for your inquiry.
Hi Jonathan,
Are you already completely satisfied with one of the sent solutions or are you still looking for the best.
Best regards!
Are you already completely satisfied with one of the sent solutions or are you still looking for the best.
Best regards!
Okay, that was very helpful, thanks a lot.
The plaque already exists. You need to design the handle for the plaque. Plaque dimensions in last comment.
The holes are pre-existing. If you can design some sort of attachment to the plaque with the pre-existing holes that attached to the handle somehow, great. But this is a "nice to have" and not a hard requirement.
I&
;m concerned more with styling and ease of manufacturing.
The holes are pre-existing. If you can design some sort of attachment to the plaque with the pre-existing holes that attached to the handle somehow, great. But this is a "nice to have" and not a hard requirement.
I&
;m concerned more with styling and ease of manufacturing.
Sorry for asking a lot of questions, but we are trying to make it look expensive and easy to use.
You mean that we can&;t design anything on the plaque for quick attach/detach (the plaque does already exist), and it will only have a two holes for M6 screws?
You mean that we can&
;t design anything on the plaque for quick attach/detach (the plaque does already exist), and it will only have a two holes for M6 screws?
@MohamedBz
For clarification:
There are two parts to this sign:
1) The handle itself
2) The Plaque with a slogan
- The plaque and the handle are attached with two screws as of right now. See the pictures attached in the contest.
- If a design or mechanical feature can be incorporated where the handle and the plaque have an attachment that allows for a quick detach/quick attach, that would be great, But this is not a hard requirement. This is a "nice to have" not a "must have".
- The Plaque is 5mm thick and needs to be recessed into the handle so that the plaque does not snag or catch anything thats attached to it. It must be streamlined.
-I&;m not concerned with the plaque as its just a 5mm thick, 6 inch x 12 inch piece of plastic. ***This size should only be the requirements for the handle for which it must *HOLD* the plaque.*** I don&;t need to have a re-design of the plaque. (Its a handle design, not a plaque design)
For clarification:
There are two parts to this sign:
1) The handle itself
2) The Plaque with a slogan
- The plaque and the handle are attached with two screws as of right now. See the pictures attached in the contest.
- If a design or mechanical feature can be incorporated where the handle and the plaque have an attachment that allows for a quick detach/quick attach, that would be great, But this is not a hard requirement. This is a "nice to have" not a "must have".
- The Plaque is 5mm thick and needs to be recessed into the handle so that the plaque does not snag or catch anything thats attached to it. It must be streamlined.
-I&
;m not concerned with the plaque as its just a 5mm thick, 6 inch x 12 inch piece of plastic. ***This size should only be the requirements for the handle for which it must *HOLD* the plaque.*** I don&;t need to have a re-design of the plaque. (Its a handle design, not a plaque design)
If there any other updates needed, any information would be very helpful.
Hello, there is one thing i still didn&;t understand: you mentioned a groove for a sign plaque of 5mm deep,
you mean that you will print your text directly on this plaque, or you will print your text on another plaque like cars registration plaque or any sheet of metal or paper and fix it on this 5mm deep plaque?
in case it is not printed directly on this 5mm plaque, you want a quick attach/detach system on:
1-the handle and the 5mm plaque?
2-the 5mm deep plaque and the other the text is printed on sheet?
3-the handle, the 5mm plaque and the printed on sheet?
thanks for your presence, and there any other updates needed, any information would be very helpful.
;t understand: you mentioned a groove for a sign plaque of 5mm deep, you mean that you will print your text directly on this plaque, or you will print your text on another plaque like cars registration plaque or any sheet of metal or paper and fix it on this 5mm deep plaque?
in case it is not printed directly on this 5mm plaque, you want a quick attach/detach system on:
1-the handle and the 5mm plaque?
2-the 5mm deep plaque and the other the text is printed on sheet?
3-the handle, the 5mm plaque and the printed on sheet?
thanks for your presence, and there any other updates needed, any information would be very helpful.
Johnathan, don&;t close the contest yet. I am working on my design.
;t close the contest yet. I am working on my design. 
Are you using a 5-axis cnc?
The logo is to be incorporated, please check with the functionality and aesthetics of design. your feedback is important.
This is for all designers in this contest. This will be a 100% billet aluminum product with anodized coating. There will be no paint or any other methods of manufacturing or finish. Your design has to reflect the manufacturing processes otherwise it will not be able to be mass produced.
In addition, I would like to re-iterate to all designers that functionality and elegance are key in this contest. Please remember to look at the picture reference I&;ve attached to this contest summary.
If you have any questions, please feel free to post here.
In addition, I would like to re-iterate to all designers that functionality and elegance are key in this contest. Please remember to look at the picture reference I&
;ve attached to this contest summary.If you have any questions, please feel free to post here.
For design considerations, the handle needs to be straight, with design elements.
Hello, thanks for your previous response about manufacturing.
I will soon submit the first model and others later.
I will soon submit the first model and others later.
I&;ve added additional guidelines and samples for ideas.
;ve added additional guidelines and samples for ideas.
Response to Entry 
:
I&;ve just submitted a "handle sample - guideline" to give you guys a rough idea of what I&;m expecting. I don&;t want it to be 1 single flat piece of aluminum that is CNC cut. This is *billet* meaning this will have dimensions, product should *not* be flat. The signs will be one piece and flat, there will be no moving parts on the sign itself. *ONLY THE HANDLE* if you can integrate it into your design.
:I&
;ve just submitted a "handle sample - guideline" to give you guys a rough idea of what I&;m expecting. I don&;t want it to be 1 single flat piece of aluminum that is CNC cut. This is *billet* meaning this will have dimensions, product should *not* be flat. The signs will be one piece and flat, there will be no moving parts on the sign itself. *ONLY THE HANDLE* if you can integrate it into your design.
1-you mentioned that it will be built CNC mill & lathe, did you mean for prototyping only? Or even for mass production you will use CNC lathe & mill?
The handle will be made from billet aluminum, similiar to a performance auto part. Will be using CNC to create the final product, so the design needs to reflect this as well.
2-And about the handle, do you prefer a full volume part or a shell part with 1.5mm to 2mm thickness or as you desire?
I perfer a full volume part with strength, but with weight reduction.
3-If mass production is not a CNC lathe & mill then witch of these procedures will it be:
a-Aluminum section extrusion?
b-Stamping and sheet metal folding? Can it include welding?
Production will be CNC mill and/or lathe, depending on design. There will be no welded parts.
4-You mentioned that you prefer a one part handle, but a quick attach/detach solution will require some extra small parts and more form complexity of the handle, is it okay to go with it?
One part main body handle with some detachable small items such as buttons, screws and hinges are acceptable. I just don&;t want two major pieces that will require assembly by the end consumer. End product should be "ready-to-go" once they open the box.
The handle will be made from billet aluminum, similiar to a performance auto part. Will be using CNC to create the final product, so the design needs to reflect this as well.
2-And about the handle, do you prefer a full volume part or a shell part with 1.5mm to 2mm thickness or as you desire?
I perfer a full volume part with strength, but with weight reduction.
3-If mass production is not a CNC lathe & mill then witch of these procedures will it be:
a-Aluminum section extrusion?
b-Stamping and sheet metal folding? Can it include welding?
Production will be CNC mill and/or lathe, depending on design. There will be no welded parts.
4-You mentioned that you prefer a one part handle, but a quick attach/detach solution will require some extra small parts and more form complexity of the handle, is it okay to go with it?
One part main body handle with some detachable small items such as buttons, screws and hinges are acceptable. I just don&
;t want two major pieces that will require assembly by the end consumer. End product should be "ready-to-go" once they open the box.
Hello,
1-you mentioned that it will be built CNC mill & lathe, did you mean for prototyping only? Or even for mass production you will use CNC lathe & mill?
2-And about the handle, do you prefer a full volume part or a shell part with 1.5mm to 2mm thickness or as you desire?
3-If mass production is not a CNC lathe & mill then witch of these procedures will it be:
a-Aluminum section extrusion?
b-Stamping and sheet metal folding? Can it include welding?
4-You mentioned that you prefer a one part handle, but a quick attach/detach solution will require some extra small parts and more form complexity of the handle, is it okay to go with it?
Thank you for your time and please to accept my best salutation while waiting for a reply.
1-you mentioned that it will be built CNC mill & lathe, did you mean for prototyping only? Or even for mass production you will use CNC lathe & mill?
2-And about the handle, do you prefer a full volume part or a shell part with 1.5mm to 2mm thickness or as you desire?
3-If mass production is not a CNC lathe & mill then witch of these procedures will it be:
a-Aluminum section extrusion?
b-Stamping and sheet metal folding? Can it include welding?
4-You mentioned that you prefer a one part handle, but a quick attach/detach solution will require some extra small parts and more form complexity of the handle, is it okay to go with it?
Thank you for your time and please to accept my best salutation while waiting for a reply.
Similar Contests on Cad Crowd
Remodelling of sofa-designs & Work-drawings / CAD
- Remodelling of sofa-designs
- Renderings
- CAD/technical drawings
- 3D
- Product designer
I'll send the models.
Create 3D model and 2d drawings
Work involves creating 3D models and 2D drawings. All required guild lines / instructions will be provided.
Skill Set:
Autodesk Inventor - Expert
Communication - Excellent
Sheet metal design experience - Proficient
This is a ongoing work for 6-9 months 40-50 hours per week. Budget is $25-30 per hour
TORE Pool House
I created most of the floor plan but I need the following:
final design, structural engineer to include the pillar and beam design. I want to least amount of pillars so I do not have a limit on the size of pillars.
1. Every part of the building that can be concrete will be concrete
2. All walls are hollow block
3. All floors are poured concrete
4. All roofs are poured concrete
5. All terrace/balconies are poured concrete
6. All stairs are poured concrete
7. All doors are at least 36 inches
8. No spiral staircases
9. please design the electrical to US standard
10. please design the plumbing too
11. please design the pool mechanics too. the location for the pool mechanics is labeled on the attached drawing
12. please include the septic tank
13. the ground floor will be 6 feet above current grade. we will back fill under and around the building as needed
14. the basement will be 6 feet tall
15. the distance from the ground floor to the bottom of the first floor is 12 feet
16. the distance from the floor of the first floor to the bottom of the roof deck is 12 feet
17. we will use steel decking under the first floor and the roof deck concrete slabs
18. we will have solar system with panels mounted on the roof deck
19. the location of the solar system and generator is labeled on the attached drawing
20. All ground floor and first floor "Exterior" walls will be glass doors - sliding stacking doors (except around kitchen, storage area, generator room, pool pump room, and bathrooms)
I do not know what information I need to add so please tell me what information you need
GENERAL CABINETRY
I NEED SOME ONE TO SET UP MY CABINET VISION TO MY NEEDS AND MY SPECKS AND INSTERTING ALL THE DATTA SO THE SOFT WARE DOSE ALL THE WORK
dfbgvnb
vcbncvb
johnathanl
Buyer