Hire the best freelance Composite Materials expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I am an enthusiastic and experienced Industrial Designer with a strong passion for developing innovative, user-centered products that meet production requirements from initial concept through to final... Read more

I am an enthusiastic and experienced Industrial Designer with a strong passion for developing innovative, user-centered products that meet production requirements from initial concept through to final product. With over five years of experience in designing projects for consumer goods, wearable electronics, medical and wellness devices, and robotics, I deliver aesthetically pleasing design solutions optimized for cost-effectiveness and manufacturing complexity. My expertise includes designing for injection molding, RIM technology, composite materials (carbon fiber), metalworking (bending, stamping, cutting, welding), and various surface treatments and coatings on plastic, silicone, and metal (e.g., PAD-printing, engraving). I led and designed the UNAwheel Maxi project, which received the international iF Design Award for its design.

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throu... Read more

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throughout my career, I've learned to design and model extensively in AutoCAD, Fusion, and other similar software like Blender or Catia. Please let me know if I can help with your design needs! In addition, I am a useful source for rapid prototyping and manufacturing.

With over 16 years of experience in mass transport manufacturing, I possess a strong understanding of safety standards and requirements for producing reliable products. I excel in project planning, ma... Read more

With over 16 years of experience in mass transport manufacturing, I possess a strong understanding of safety standards and requirements for producing reliable products. I excel in project planning, management, and execution, ensuring on-time and within-budget delivery. My adaptability is evident in my work across various industries, including electronic equipment design, site decommissioning, and plant equipment design. As a Self-Employed/Contract Engineer, I specialise in designing bespoke mass transport products like toilet cabins and seating. Notably, I have contributed to the successful development of rail passenger seat products, focusing on comfort, features, and low weight. My expertise covers mechanical and electrical systems, encompassing elements such as reading lights, USB ports, and mains sockets. Throughout my career, I have held positions such as Engineering Project Lead, Senior Design Engineer, and Systems Manager & Engineering Manager. I am experienced in managing projects, delivering prototypes on time and within budget, and continuously improving product designs. With a focus on composite materials, sheet metal, and cast aluminium, I ensure compliance with industry standards like EN 45545, PRM-TSI, and GM/RT2100. As a member of the Institution of Engineering and Technology, I prioritise professional development and staying abreast of industry advancements.

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for... Read more

Innovation engineer developing Electro-mechanical products for functional prototyping and industrial manufacturing. Leading product design from High-level requirements to pre-production prototype for hardware start-ups, SME's and crowd-funded projects from all over world. Fostering design innovation to optimize functionality, aesthetics and manufacturing costs. Combining radical ideas with technical expertise to make unique and leading products. With expertise in design and prototyping, I am seeking clients who need innovative engineering solution for their businesses. Expertise: * Design innovation. * Concept development. * Product engineering. * System engineering. * Design and cost optimization. * Functional prototyping. * Vendor sourcing for industrial manufacturing.

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-o... Read more

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-of-Autoclave (VARTM, Vacuum Only) car frames to autoclave cured aerospace structures. I have extensive experience in thermal analysis of brake systems, autoclaves, ovens, and tooling.

• Research assistant , SHEI Ukrainian State University of Chemical Technology (Sep 2001- Nov 2001) • Post-graduate student, SHEI Ukrainian State University of Chemical Technology (Nov 2001- Sep 2004)... Read more

• Research assistant , SHEI Ukrainian State University of Chemical Technology (Sep 2001- Nov 2001) • Post-graduate student, SHEI Ukrainian State University of Chemical Technology (Nov 2001- Sep 2004) • Assistant professor, SHEI Ukrainian State University of Chemical Technology (Sep 2004- Sep 2014) • R&D consultant, Nexus-2F Ltd (Sep 2010 - Sep 2016) • R&D, mechanical tests, scientific calculations Space Systems Engineering Ukraine LLC(Mar 2017 - Feb 2018) • Associate professor, SHEI Ukrainian State University of Chemical Technology (Sep 2014- present time)

I am a Mechanical Engineer and CAD Expert with experience of 7 years As a dedicated full-time freelancer, I provide Product Development and Reverse Engineering services to clients. Products and 3D CA... Read more

I am a Mechanical Engineer and CAD Expert with experience of 7 years As a dedicated full-time freelancer, I provide Product Development and Reverse Engineering services to clients. Products and 3D CAD Models including Sheet Metal Designs, 3D Printed Designs, Composite Designs, and Plastic Designs (Injection Molding, Thermoforming). The designs are Validated using Simulation and Mechanical Analysis along with the selection of appropriate materials, and enhance overall design quality. Following prototyping of the Products, I provide comprehensive manufacturing drawings alongside compelling rendered images and animations that vividly showcase product and the assemblies. My approach is driven by efficiency, both in terms of design timelines and costs. I integrate pre-existing manufactured parts and components from a spectrum of suppliers into my designs. By doing so, I ensure not only economical design execution but also preemptive mitigation of redundant manufacturing expenses. All this is presented with meticulous detail, including material selection, Bill of Materials (BOM), and accessible sourced links. In Tight Tolerance Project, I implement Tolerance Analysis in Assembly Design, where I adhere to ISO 286 and ISO 2768 Tolerance standards. For accurate and precise manufacturing, I use ASME Y14.5 GD&T in manufacturing drawings. Feel Free to contact me regarding your project and I will be glad to share my insight. My diverse project history includes: • Product Design encompassing metal, plastic, and composite materials • Designing 3D Printed Components • Plastic Injection Molded Designs • Automotive Parts with Precision • Sheet Metal Designing • Composite Mold Designs • Plastic Design Solutions • Part Designs for Machining Processes My capabilities also extend to the domain of transforming 3D Scans into robust 3D CAD Models: # 3d Scan Alignments and Registration/Merging # 3d Scan Data, Mesh Data and Point Cloud Data optimization # Conversion of 3D Scan Data to 3D CAD Model # STL, XYZ, PLY to STEP # Accurate CAD Model with Deviation Analysis # 2D Drawings from 3D Scanned Data # Area, Volume Calculations, and Inspection of 3D Scan Data # 3D Scan and 3D CAD Comparison report # 3D Scan Data to Assembly model # 3D Scan to Mold Designs of parts Mechanical Analysis and Simulations; 1. Design Strength analysis to find the factor of safety under loads. 2. Structure Designs Analysis for Load distributed to Foundation. 3. CFD Analysis for Drag, lift forces. 3D Printed Parts: # 3D Printed Enclosures or Casings for Electrical and Electronic PCB devices # 3D Printed Gadgets # 3D Printed parts for Machines such as gears, brackets. # 3D Printed parts for Products and Prototypes Softwares I use; 1. SolidWorks / SolidWorks Simulation 2. Catia 3. Geomagic Design X 4. Meshmixer 5. Creality Slicer 6. Keyshot Deliverables: 1. .OBJ, .STL .STEP, .IGES, X_T (Parasolid) etc formats 2. SolidWorks, Inventor, Creo, and Catia formats 3. 2D Drawings in .dwg, PDF, DXF 4. Rendered Images 5. Rendered Animations

I'm a Design Engineer and my core works are product design, development and analysis. Creativity and time management are those two skills I adore much than other. I have provided many works to clients... Read more

I'm a Design Engineer and my core works are product design, development and analysis. Creativity and time management are those two skills I adore much than other. I have provided many works to clients and best project I would say is a satellite prototype. My area of expertise product developing and analyzing it.

Work experience: • 01.04.2014 - up to this date → Passive Safety Engineer Workplace: RENAULT TECHNOLOGIE ROUMANIE Responsibilities: Realizing the pre- and post- processing of complex Finit... Read more

Work experience: • 01.04.2014 - up to this date → Passive Safety Engineer Workplace: RENAULT TECHNOLOGIE ROUMANIE Responsibilities: Realizing the pre- and post- processing of complex Finite Element Models and analyzing the behavior of the BIW (body in white) subjected to different load cases, according to the type of calculation required: passive safety, endurance or NVH. Analyzing the BIW behavior and proposing solutions to the problems encountered, in order to achieve the required performances. Proposing solutions, drawing parts and iterating rapidly in order to improve different behaviors of the BIW. Using specialized programs for each step of the process (such as ANSA or Hypermesh for pre-processing, PamCrash, Nastran, Abaqus for processing and MetaPost for post-processing) Realizing and writing standardized calculation procedures or technical documentation. Training new employees, teaching at workshops. Making correlations between tests and the Finite Element Calculations. Supervising projects during the development phase and during their life. • 01.09.2013 - 31.03.2014 → CAD/CAE Engineer Workplace: SEGULA TECHNOLOGIES ROMANIA SRL Responsibilities: Realizing the pre- and post- processing of complex Finite Element Models and analyzing the behavior of the BIW (body in white) subjected to different load cases, according to the type of calculation required: passive safety, endurance or NVH. Analyzing the BIW behavior and proposing solutions to the problems encountered, in order to achieve the required performances. Proposing solutions, drawing parts and iterating rapidly in order to improve different behaviors of the BIW. Using specialized programs for each step of the process (such as ANSA or Hypermesh for pre-processing, PamCrash, Nastran, Abaqus for processing and MetaPost for post-processing) • 11.06.2012 - 03.08.2012 → Car mechanic Workplace: SC Ana Reviteh SRL, 9 Tudor Vladimirescu Street, Otopeni, Ilfov, Romania Responsibilities: Repairing cars, ensuring the maintenance operations for cars, making the periodically technical inspections Education: • 2013 - 2015 → Universitatea POLITEHNICA din Bucuresti (Transports College, Automotive Department ) Degree: 2nd Degree in Automotive Engineering Studied subjects: NVH; Finite Element Simulations in the Automotive Industry using Ansys; Automotive Testing; Internal combustion engines - simulation of thermodynamic processes; Automotive aerodynamics - Theoretical models and Finite Element analysis using CFD/CFX; Longitudinal and lateral automotive dynamics - Studies of stability and maneuverability using theoretical models and software (TruckSim / CarSim); Automotive components - Studies of durability using theoretical models and software (Ansys); Electric and hybrid vehicles; Automotive dynamics modeling using Matlab Simulink; Automotive passive and active safety; Tire - road interantion; Automotive components simulations using LMS AMESim. Scientific research: Analysis of usage of carbon fiber composites in order to design and construct the monocoque structure for a Formula Student car. Skills: A better understanding of the construction and operation requirements of cars; Use of different software to simulate different processes or components for a car; Advanced modeling capabilities. • 2009 - 2013 → Universitatea POLITEHNICA din Bucuresti (Transports College, Automotive Department ) Degree: 1st Degree in Automotive Engineering Studied subjects: Advanced technical drawings knowledge; Theoretical knowledge in designing and constructing internal combustion engines; Automotive Dynamics; Automotive testing; Automotive maintenance; Automotive noises and vibrations; 3D modeling using Catia v5, SolidWorks and Autodesk Inventor; 2D modeling using Autodesk Autocad and Catia v5; Kinematic analysis of mechanisms; Scientific research: Designing and constructing a spatial frame made out of steel tubes, for a Formula Student race car. Skills: Advanced knowledge in design, construction and operating principles of motorized vehicle; Advanced skills in 3D modeling parts, components and subassemblies of motorized vehicles; Knowledge in reading and interpreting technical drawings; Knowledge in automotive testing; Outstanding performances: Valedictorian student • 2005 - 2009 → National Informatics College "Tudor Vianu" Degree: Assistant programmer Studied subjects: Advanced mathematics and computer science; Skills: C++ programming; Basic knowledge of HTML programming; Foreign languages: Romanish: C2 - Native English: C1 - Expert German: B2 - Advanced French: A1 - Beginner Romanian: C2 - Native Activities: President of the Formula Student Team at the University Took part in activities organized by Junior Achievement: JA Student Company, JA Titan, JA Business Ethics; 1st and 2nd Prize at National competitions in Theoretical Mechanics and Mathematics; Overall skills: Design and analyze automotive components; 2D and 3D designs skills; Advanced knowledge in passive and active safety; Advanced knowledge in Finite Element modeling; Advanced knowledge in components simulating software;

I joined the Instituto Superior de Engenharia de Coimbra in 2008, with a degree in Mechanical Engineering (post-Bologna). Concludes, at the same institution, the Master in Mechanical Systems and Equip... Read more

I joined the Instituto Superior de Engenharia de Coimbra in 2008, with a degree in Mechanical Engineering (post-Bologna). Concludes, at the same institution, the Master in Mechanical Systems and Equipment in 2013, in a total of 5 years of academic career. Associativism was not left out: I joined the Orxestra Pitagórica and was a founding member of the Tuna Académica of the institution where I studied (ISECOTUNA). I was awarded two FCT Research Grants, one in 2013 which focused on the mechanical properties of composite materials, combined forces and interlaminar fracture, another in 2014 in the context of the structural integrity of aeronautical light alloys (propagation of fatigue cracks, overloads, crack closure phenomenon and its measurement by DIC – Digital Image Correlation). I was involved in the Vehicle Transformation Industry, in an ambitious project called TecLife, where I played the role of Production Engineer during a year of great growth and maturation for the company. I continued to work in the automotive area, belonging to the logistics team at Gestamp Vendas Novas, an international group dedicated to the design, development and manufacture of metallic components and assemblies for the automotive industry, with Volkswagen Autoeuropa as its main customer. Given the scope of projects in which I was involved, I acquired solid knowledge in terms of Supply Chain Management, having followed an intense period of growth in production activity, industrialization and adjudication of new projects, always following the Industry 4.0 model. I also played the role of Project Designer at SIRMAF, where I was responsible for the construction project and conversion of special robotic machines for the automotive industry. I also prepared 3D and 2D CAD, specifications, instruction manuals, risk analysis, preventive maintenance tables, etc. I also developed methods and time optimization projects at Paul Stricker, and actively participated in the training of new employees. After some accumulated experience, I continued to develop my career as a Designer Designer at Indusstock, where I was also responsible for the production department. I am currently part of the Riatrónica team, being the Mechanical Project Manager.

I am a mechanical engineer with a solid academic background from the Polytechnic University of Turin, one of the most renowned institutions in the field of engineering. During my academic journey, I h... Read more

I am a mechanical engineer with a solid academic background from the Polytechnic University of Turin, one of the most renowned institutions in the field of engineering. During my academic journey, I had the opportunity to delve into a wide range of engineering disciplines, acquiring an in-depth knowledge of the fundamental principles governing the operation of mechanical systems. This path provided me with a solid foundation on which to build my professional career and prepared me to tackle real-world challenges. One of the most significant experiences of my career was my collaboration with Leonardo S.p.A., a leading company in the aerospace and defense sector. In this role, I had the honor of leading the development process of an advanced physical model of a polymer matrix composite material. This project involved multiple phases, from conceptualizing the model to its detailed modeling using state-of-the-art CAD software, to in-depth analysis using the Finite Element Method (FEM). I worked closely with a multidisciplinary team of engineers and scientists to ensure the accuracy and reliability of the model, thereby contributing to the success of the project as a whole. In addition to my experience with Leonardo S.p.A., I had the privilege of leading consulting projects for the restoration of historic racing cars, particularly vintage Formula 1 cars. This sector combines my passion for mechanical engineering with my love for the history of motorsport, offering me the opportunity to apply my engineering skills while preserving and restoring the historical heritage of motor racing. During these projects, I worked closely with passionate collectors and industry experts to ensure maximum historical authenticity and the best possible performance of the restored cars. Another significant experience that has shaped my professional journey was my involvement in a team in the suborbital spaceflight sector. This unique opportunity was offered to me through a challenge promoted by the European Aerospace Museum, in collaboration with the European Space Agency (ESA), ArianeGroup, and Dassault Aviation. As a member of this team, I had the opportunity to contribute to the design and structural engineering of a suborbital vehicle destined to challenge the boundaries of the Earth's atmosphere. This project exposed me to a wide range of unique technical challenges in the aerospace sector and allowed me to work closely with some of the top engineers and scientists in the field. My passion for innovation and precision guides every aspect of my career. I am constantly seeking new ways to apply my engineering skills to solve complex problems and advance ambitious projects. My experience has taught me the importance of collaboration and teamwork in achieving common goals, and I am always ready to test myself in new challenges that require creativity, dedication, and determination. In addition to my professional experiences, I am committed to continuing my learning and development of my skills. I stay updated on the latest innovations in the field of mechanical engineering and regularly participate in training courses and conferences to stay abreast of industry trends. I am also an active member of several professional organizations, which offer me the opportunity to connect with other industry professionals and share my experiences and knowledge. In conclusion, I am a passionate and determined mechanical engineer with a solid academic background and extensive professional experience in the engineering field. I am motivated by the challenge of solving complex problems and contributing to the progress of science and technology. I believe that my skills, experience, and dedication can be an asset to any project or organization, and I am excited to put my abilities to work for future challenges.

Material Science / Mechanical Engineer with a demonstrated history of working in the automotive and manufacturing industry. Skilled in CAD design and simulation, supply chain management, systems engin... Read more

Material Science / Mechanical Engineer with a demonstrated history of working in the automotive and manufacturing industry. Skilled in CAD design and simulation, supply chain management, systems engineering, metal fabrication, and CNC operation. These skills allow me to design in a way that takes all aspects of product development into consideration. Strong operations professional with a Bachelor’s Degree focused in Material Science Engineering from Washington State University.

WORK HISTORY: 18/01/2018-Actually. Company name MIZAR (Barcelona). Chief Engineer. MIZAR, Técnicas de Mezclado S.L., is a firm that designs and manufactures mixing machines employing cutting edg... Read more

WORK HISTORY: 18/01/2018-Actually. Company name MIZAR (Barcelona). Chief Engineer. MIZAR, Técnicas de Mezclado S.L., is a firm that designs and manufactures mixing machines employing cutting edge technology to achieve perfect homogeneity of dry and semi-dry products covering different sectors of: mortars and derivatives, refractories, gypsum, smelting, inertisation, abrasives, ceramics, glass… We have specific models for each sector that are adapted to the requirements of each product and client. Our mixers stand out for being the fastest on the market, for our high mixing quality and constant innovation through our R&D department, endorsed by the satisfaction of our customers on the domestic and international markets. 16/05/2017 – 17/01/2018. Company name SIDASA Engineering. (Barcelona). Engineer Supervisor / Project Engineer SIDASA Engineering is one of the world's leading integrated surface treatment company with 65 years’ experience, applying innovative technologies and capturing new opportunities for profitable growth. SIDASA develop machines to many fields of the surface treatment industry. Researching for design, manufacturing and commissioning of fully automated plants. SIDASA Engineering is full present in automotive industry. The company portfolio includes OEM, TIER I and TIER II. We supply a wide range of solutions not only for plastic but for metal surface treatment as well. At present Responsible for project supervision line assembly in Singapore of a line of automatic painting by means of conveyor system and use of robots for painting. Duration of the project 6 months. Participation in the design and development of the entire line. construction of plans and structural calculations. During the project visits have been made to suppliers to evaluate qualities of products to be supplied during the assembly of the plant. 01/03/2017-15/05/2017 Company name WorkPlane design. (Barcelona). Mechanical Engineer / Project Engineer Company that offer B2B solutions for industrial design and product development. Product design from idea to marketing. Use of core tools, APQP, PPAP, AMEF, SFC, MSA., In order to design, develop, prevent, measure, control, analyse and approve the designed prototypes, in order to comply with the quality and functionality desired by the client. Control of prototypes, support to mold design, study of programs of continuous improvement for production line. Companies for which I made projects. SIMON Tech, S & P, Parkcare, Pulltex, Sidasa, Ficosa. 01/01/2017- 28/02/2017. Company name DIMASA Grupo (Vacarisses). Senior Mechanical Engineer / Project Engineer. As a Head Engineer for the piping design installations, design, plans and calcs. Steel and composite structures, design, calcs and plans. Composite pressure vessels, design, calcs, plans and construction. Company dedicated to the construction of equipment in composite material. With branch in Mexico. Responsible in the department of engineering of design of equipment, calculation and supervision of manufacture. Also participating in design of water treatment plants for the city of Quito (Ecuador). Pipes, pumps, filters, scrubers, etc. Design and calculation of all the equipment necessities. Supervision of treatment projects water treatment plants with scrubbers. Design of biofuel plants. 2000- 2016. Project Manager / Industrial Engineer, specialty, Mechanics, Structures. Main activities:  Legalization of economic activities. projects of economic activities, presentation of documentation to official entities, plans and monitoring of works.  Legalization of electrical installations in official bodies.  Homologation of vehicles in industry.  Construction of racing sailing boats (4 units). Supervision of the construction until the end of the project. Composite structure statics and sizing calculations, Use of carbon and kevlar pre pregs, use of vacuum systems, and oven systems.  Design in composites of parts for small air planes and motorcycles. Finite element studies, fatigue of parts, laboratory tests, prototypes, etc. Using core tools .  Judicial expert for automotive parts.  rehabilitation of historic buildings, applying composite materials. Thanks to these projects I was invited to the JEC Paris to present in a conference the projects of rehabilitation realized and the applications of the composite materials in the construction. 1999-2000 Company name Tecnipenedes (Vilafranca del Penedès). Technical Office, working as Project Manager in the area of structures and equipment. The functions I do were designing metal silos and their floor anchorages, for storing starch silo dimensions of 8-15 meters high and 4 meters in diameter, equipment for the queue process also designing in the paper industry. Realization and monitoring of the assembly of structures and equipment for papermaking processes. Supervision of assemblies at the national level.

Get the Specialist degree (in Russia similar to Master degree) in Moscow Automobile and Road State Technical University in 2012. Course name was Tuning and technical control, subgroup – Motorsport car... Read more

Get the Specialist degree (in Russia similar to Master degree) in Moscow Automobile and Road State Technical University in 2012. Course name was Tuning and technical control, subgroup – Motorsport car tuning and design. From 2012 till the end of 2015 work in OAO “Prom Komposit”, in division of aerobatic aircraft as design-engineer and tooling design-engineer. The company specializes in the use of advanced composite materials in electronics and aviation, including highly loaded structural parts. At the end of 2015 I won the regional finals Infiniti Performance Engineering Academy and I got a contract with Infiniti Motors Comp in accordance with I must spend 4 months in Nissan Technical Center of Europe, after that – 8 month in Formula One team (originally it was supposed to be Infiniti Red Bull Racing, but due to the termination of the sponsorship by the Infiniti following work place has become a Renault Sport Formula One) in Vehicle Dynamic Engineer role. Here I want to find an extra possibilities to use my desing skills. At this moment I work with a group of aerospace engineers who also ready to take any extra job and improving the world through smart engineering.

We are young gen extrior root team. With highly skilled on construction. We doing interior designing, re-altering of building, and demolishing projects. We have individual team for planning and design... Read more

We are young gen extrior root team. With highly skilled on construction. We doing interior designing, re-altering of building, and demolishing projects. We have individual team for planning and designing. We are in need of project to exposes our self from your satisfaction.

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing a... Read more

Completing my Masters degree in Mechanical engineering focused on Aeroacoustics at NWU. I have experience in the aerospace industry related to composite materials component design and manufacturing at a competition class Sailplane factory I'm knowledgable with turbojet and turbofans system analysis and design with focus on centrifugal compressors

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but... Read more

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but I also used Catia V5/6 in the academic field. Experience with Matlab as numeric software, and experience with PTC Creo Simulate and Abaqus as FEA Software. During my professional life I have been working on design of racing cars with particular focus on powertrain installation, cooling systems, hydraulic systems, CNC machined components and composite material made components and related jigs and toolings, 3D printed components. Currently working in the food processing industry and involved in the design of industrial machineries and related items (fluid machinery, system's dimensioning and layout design).

I am having 2+ years of experience in product design, modification, design to cost, VAVE, and sourcing in automotive aerospace and heavy machinery industries. I worked on the design of the interior an... Read more

I am having 2+ years of experience in product design, modification, design to cost, VAVE, and sourcing in automotive aerospace and heavy machinery industries. I worked on the design of the interior and exterior parts for automobiles. Suggested VAVE ideas for parts to optimize the overall cost of assemblies. Proficient in CAD Softwares like CATIA, UG-NX, and cost estimation software like aPriori and Costimator.

I am a dedicated third year student of aviation engineering. I have a student's portfolio of experience with CAD software (Solidworks, Autodesk Inventor, AutoCAD). I also have experience with XFLR5 so... Read more

I am a dedicated third year student of aviation engineering. I have a student's portfolio of experience with CAD software (Solidworks, Autodesk Inventor, AutoCAD). I also have experience with XFLR5 software, designed to mathematically calculate various coefficients for an airfoil or airplane. I have already started my bachelor's project - to design an ultralight high speed airplane model and build it out of composite materials, using an EDF (electric ducted fan) or two as propulsion. The project has thoroughly tested my knowledge of aerodynamics and CAD software.

Design Engineer, with a large experience in the engineering design sector, with an emphasis on the development of aircraft structures. I worked mainly in the development and of metalic structures and... Read more

Design Engineer, with a large experience in the engineering design sector, with an emphasis on the development of aircraft structures. I worked mainly in the development and of metalic structures and mechanisms, machined, extruded and sheet metal parts as well as some experience with composite materials. I worked in the structural design of several Embraer programs, from the ALX-314 (Super-tucano), the EMB-170E1, Legacy-500, to the C-390 Millenium and others. I coordinated several projects, with emphasis on the design of the KC-390 Cargo Ramp, when I also developed its mechanism. In addition to the aeronautical sector, I worked with projects for the automotive sector (trucks), flood gates for hydroelectric plants, sanitation and irrigation systems. Graduated in Civil Engineering and Mechanical Technician, with Specialization (specialization) in Aeronautical Engineering. Advanced knowledge in 3D modeling, Catia V5, AutoCAD, Solidworks, MSOffice and MSProject, ERP SAP, JIRA, and GD&T. Knowledge and experience in agile management and predictive project management methodologies.

Aerospace trained apprentice with 20 years engineering experience. Currently design and maintain automated cells in the manufacturing industry. Read more

Aerospace trained apprentice with 20 years engineering experience. Currently design and maintain automated cells in the manufacturing industry.

- Skills overview: • My experience focuses on designing structures and buildings with different materials such as concrete, steel, and composite materials. • Being an Arabic native speaker and expert... Read more

- Skills overview: • My experience focuses on designing structures and buildings with different materials such as concrete, steel, and composite materials. • Being an Arabic native speaker and expert in English, I can translate from/to English with different types of documents and designs. - Software I'm proficient with: • Autodesk AutoCAD • SAP2000 • Tekla Structures • Microsoft Office • Adobe Photoshop • Adobe Illustrator

I am a 24-year-old boy and I have a master degree in mechanical engineering - mechanical designer curriculum at the Polytechnic University of Marche. I am doing a PhD in Mechanical Design now. I att... Read more

I am a 24-year-old boy and I have a master degree in mechanical engineering - mechanical designer curriculum at the Polytechnic University of Marche. I am doing a PhD in Mechanical Design now. I attended a specialization course in composite materials engineering at the Polytechnic University of Marche. During my university career, I took part in the Formula SAE project (world competition on the construction of a Formula 1 style racing car) for 4 years, 2 of which I was the technical manager of the team I can provide consultancy in the field of mechanical design, in the composites sector, FEM analysis, CAD, material characterization and in my PhD course I am concentrating on design for additive manufacturing and structural optimizations

Hello. I am an Aerospace Engineer (Masters) specializing in composite material design, engineering and fabrication including tool design. I have over 15 years direct experience in CAD design enginee... Read more

Hello. I am an Aerospace Engineer (Masters) specializing in composite material design, engineering and fabrication including tool design. I have over 15 years direct experience in CAD design engineering, but have been producing 2D designs since I was 10.

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites. Read more

Current aerospace engineer with 8 years experience. Strengths include: materials selection, thermal, tvac, and vibration environments, bonding, additive manufacturing, and composites.

- 5 years experience in Solidworks Cad Design - 3 years experience in Hypermesh finite element modelling - Experienced in numerous finite element modelling projects in automotive industry - Composite... Read more

- 5 years experience in Solidworks Cad Design - 3 years experience in Hypermesh finite element modelling - Experienced in numerous finite element modelling projects in automotive industry - Composite material part and tool design