Hire the best freelance Electrical & Instrument Design expert designers for your company

Hello, my name is Mike Baucom. I am seeking freelance 3d and 2d design and drafting work. I have over 5 years of experience in drafting/design, prototyping, and product development. Below is a more de... Read more

Hello, my name is Mike Baucom. I am seeking freelance 3d and 2d design and drafting work. I have over 5 years of experience in drafting/design, prototyping, and product development. Below is a more detailed summary. SUMMARY OF EXPERIENCE • 5 Years’ experience in the following fields below.• Junior Electrical Engineer, and 3D Drafting and design specializing in Offshore and Hazardous Location Environmental Control Units, Air Conditioners, Pressurizers, Gas Scrubbers, and Purge Units.• Time served in both electrical engineering and in a production factory setting as well as field service work performing trouble shooting, installation, and maintenance of electrical and HVAC systems.• Onsite with the end user and customers during their Factory Acceptance Testing and Evaluation.• Designing and Balancing brand new refrigeration systems.• Extensive experience in examining and testing elements of electrical systems to locate and troubleshoot faults with Electro-Mechanical, PLC, and VFD controls.• Proficient in installing new and modified electrical wiring and devices.• Technical sales experiences when speaking face to face with customers usually resulting in quotes and/or estimates to be generated.• Hands on experience in performing predictive and preventive maintenance.• Highly skilled in installing and wiring motors and motor control devices such as disconnects, relays, contactors and VFDs.• Thorough knowledge and understanding of applied trade practices and techniques such as NFPA 496, NEC 500, NEC 505.• Computer Skills include but not limited to all of Microsoft office, SolidWorks 2016, AutoCAD Inventor 2015, AutoCAD 2004-2013, and Adobe Suite.

I DESIGN IN 3D AND HAVE THE SKILLS TO BUILD WHAT I DESIGN. I DESIGN IN AUTODESK INVENTOR FOR MECHANICALS. 3D PRINT IN CURA. ETAP 16 FOR ELECTRICALS. Read more

I DESIGN IN 3D AND HAVE THE SKILLS TO BUILD WHAT I DESIGN. I DESIGN IN AUTODESK INVENTOR FOR MECHANICALS. 3D PRINT IN CURA. ETAP 16 FOR ELECTRICALS.

Electrical Engineering background result-driven entrepreneur, with good experience in to Design, Analysis, Simulate and Visualize 3D Environment for Projects,Domestic and Global Projects support, Busi... Read more

Electrical Engineering background result-driven entrepreneur, with good experience in to Design, Analysis, Simulate and Visualize 3D Environment for Projects,Domestic and Global Projects support, Business Development, and General Administration. Project Management. Strong business skills to drive business through conceptualize,develop and introduce new market oriented services with multiple clients at international standards IS, BS, IEC, CIN, EU, ATEX, OSHAS, LG7. Possess good Skills in Project analysis and Projects planning, implementation and timely completion. Knowledge of International certification Procedures. Extensively travelled to various parts of the world namely Germany,Switzerland,France,Italy, Srilanka, Thailand, Dubai and Middle East on business trips and Supported in various phases and projects of company. Experienced in documentation, PESO, ATEX, Explosive zone Engineering, System Engineering, Power Plants Design and Safety Standards IEC 61508, IEC 61511. Core competency in Engineering Design, Illumination Engineering, 3D Visualising.

Hi,I am Omar, a mechanical design engineer with expertise in engineering. I have strong skills in simulation and 3D design using CAD software (SolidWorks, Catia, AutoCAD, revit). I always strive to ac... Read more

Hi,I am Omar, a mechanical design engineer with expertise in engineering. I have strong skills in simulation and 3D design using CAD software (SolidWorks, Catia, AutoCAD, revit). I always strive to achieve excellence in my work by providing accurate and innovative mechanical design services. Thanks to my strong engineering and design background, I strive to achieve customer insights and deliver projects satisfactorily through effective and innovative solutions that enable me to provide the following services: - Industrial Design - Product Design - Prototype design -3D modeling (3D modeling, 3D rendering) -2D graphics (2D Drawing) - Create motion animation, exploded view Why do you have to choose me: - Experience in simulation and 3D modeling - Efficient and high-quality project delivery with fast delivery - Comprehensive design solutions and attention to detail - Creative solutions to solve problems - The most important is the professional communicating, focusing on the customer needs and satisfaction Thank you for visiting my personal page and seeing my work. I look forward to dealing with you. Greetings, Omar Miri

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goal... Read more

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goals. My strengths include great electrical designing skills, people and time management, strong communication and interpersonal skills. I am a go-getter and work hard to achieve my goals. I am a diploma holder in electrical engineering with more than 20 years of experience and since 2000 I am working for a US based multinational automation company, which mainly deals with AC Drives, DC Drives, Higher rating thyristor bridges, MCC, PCC, Capacitor panel, CLX panels and Flex I/Os panels. Through this rich experience I have gained good knowledge in electrical switch gears and various electrical standards like NEMA and IEC. Also I realize the value of customer satisfaction and trust. I am specialized in designing layout diagrams (GA and IGA), SLD, Schematic diagrams, Cable tray layouts, Room layouts and Bill of Materials for all kinds of electrical panels. I do the panel sizing, switch gear selection and cable schedules independently. I am also an expert in designing control scheme (Ladders) for interlocking of power and control circuits. For schematic drawings I use all the features in AutoCAD electrical.

I am an engineer Read more

I am an engineer

I consider myself a very curious and persistent person, who stands for challenges and new knowledge.I work and live in Serbia. I am 10 years old in the process of manufacturing and processing metal pr... Read more

I consider myself a very curious and persistent person, who stands for challenges and new knowledge.I work and live in Serbia. I am 10 years old in the process of manufacturing and processing metal products. My job is to create products according to customer requirements, and to make all the technical documentation for making and making myself tailor-made for machines.In addition, I worked on designing and making tools and machines.I design all prototypes in Autodesk Inventor.

A dynamic Electrical Engineering student with hands-on experience in power system design, real-time data acquisition, and advanced lighting projects. Highlights include completing a CEP in commercial... Read more

A dynamic Electrical Engineering student with hands-on experience in power system design, real-time data acquisition, and advanced lighting projects. Highlights include completing a CEP in commercial building load calculation, CB sizing, and cable sizing; designing an 11kV distribution scheme with N-1 contingency; and implementing accent and task lighting for commercial spaces using DIALux evo. Skilled in MATLAB, AutoCAD, ETAP, and DIALux, I combine technical expertise with a results-driven approach to deliver innovative engineering solutions.

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company... Read more

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company is called Faithful Engineering, LLC. I served as a Vice President of Engineering for 20 of my 33 years in the product manufacturing industry, so there are very few engineering functions that I have not had some experience with. Let me show you what a difference that can make!

I am a very ambitious and motivated CAD designer who is always eager to learn and gain knowledge from everything I take part in. I take pride in all my work and am always trying to impress with my ski... Read more

I am a very ambitious and motivated CAD designer who is always eager to learn and gain knowledge from everything I take part in. I take pride in all my work and am always trying to impress with my skills. My primary work is in electrical design and I have experience with structural and mechanical design as well. I am also looking to explore other fields of design work to expand my skills. I typically use AutoCad, but I am proficient with all AutoDesk programs. I’m also familiar with most of the well know CAD programs. I have excellent attention to detail and problem solving skills and I am always going the extra mile to make sure I am doing everything I can to help the team.

Greeting: I well come you to my profile. Hope you are doing great. I have about 20 Years experience as Test Inspector of Electrical Protection & Instrumentation at EHV System of Grid S... Read more

Greeting: I well come you to my profile. Hope you are doing great. I have about 20 Years experience as Test Inspector of Electrical Protection & Instrumentation at EHV System of Grid Station Operation and Thermal Power Station. I have professional expertise in following; 1- Auto CAD Electrical 2d & 3d. 2- MATLAB Programming & SIMULINK. 3- PS CAD V5. (Simulation) 4- Electrical Drawings Designing & Drafting. 5-Electrical Protection & Instrumentation (Relays & Temperature Equipment) Circuits Troubleshooting and Verification. 6- Relays installation , Commissioning , Testing and Circuit Designing , Drafting and Troubleshooting. 7- MS Office (Word , Excel , Power Point , Visio). All work will be done with fully satisfaction of the employer with free mockups and unlimited revisions.

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of th... Read more

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of the areas of I&E Design, including basic knowledge of UL Industrial Control Panel fabrication standards for non-hazardous (UL 508A) and hazardous locations (UL 1203, 698A). Assist in conducting field audits and investigations of customer facilities and manufacturing plants. I try to identify opportunities for improvement and make constructive suggestions for change. Comply with company standard policies and procedures. I have experience and Technical Training in Instrument and Electrical Design for the Industrial, Commercial, Manufacturing, or Oil and Gas industries. iOccasional travel to client offices and construction sites will be required.

Daniel Gillenwater Profile Professional: · Project management, from conception to as built. · Construction planning and coordination. · Low and medium voltage power system design and... Read more

Daniel Gillenwater Profile Professional: · Project management, from conception to as built. · Construction planning and coordination. · Low and medium voltage power system design and construction. · Process control and automation design and construction. · Creating and interpreting Piping and Instrumentation Diagrams. · CEM system design, construction, calibration and maintenance. · Familiar with NEC, NFPA, CFR40 parts 53, 60 and 75. · Provide electrical safety and arc-flash training · Electrical equipment field service and testing.   Personal: · Recognized as a focused self motivated person who is always willing to do whatever is necessary to get the job done right and on time.   Computer software skills: · Microsoft; Windows and Office Suite · Autodesk; Auto Cad · Rockwell; RS Logix  for Allen Bradley PLCs · SKM power tools · Easy Power

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important tha... Read more

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important that I want to share with you today. For most of you reading this, hiring an electrical engineering freelancer or contractor has been a struggle to say the least. You have likely lost a great deal of money only to receive a sub-marginal product. Constant change orders, redraws, slow work, missed deadlines, failing “cross-functional” teams, no quality assurance, and huge bills are just a few examples. I would imagine that you are feeling very frustrated, confused, and maybe even a little humiliated. Does this sound about right? You are correct to be worried, because many people get screwed over when they hire an engineering contractor. But what if I told you there is one thing, just one thing you could do to flip the script? It is as easy as sending me a message on Cad Crowd. I am an American entrepreneur, electrical engineer, and trusted consultant. I am an accomplished expert with nearly a decade of experience in the electrical engineering industry. As a knowledgeable professional with experience in the nuclear industry, I have had serious involvement with numerous quality-dependent, critical power and control systems. Within five years of graduating from the prestigious Clarkson University with a Bachelor of Science Degree in Electrical Engineering, in addition to minors in both Computer Science and Mathematics, I obtained experience at a multinational technology company and also rapidly became a trusted, lead analytical engineer at Indian Point Energy Center. Today, I help individuals and entrepreneurs maximize their profits by increasing their technical expertise. Once we are both interested in working together on a project, before you even spend a penny, I offer a free, no-obligation video conference kick-off meeting to eliminate any reasonable doubt that we are a perfect match for each other. When working with me, you get to save money on high-quality services. If, like for many cash-constrained businesses, your budget is under scrutiny, you may be forced to rationalize your procurement model. Traditional consulting firms are just not agile enough to adapt. Red tape strangles engineers in many firms. Do not overspend on a wasteful system. Embrace the cost reductions! It is the only way to accelerate your growth and wealth! When working with me, you have access to a quick, easy, and convenient hiring process. In the engineering services sector, most businesses still rely heavily on localized industry experts, consulting firms, and in-house talent. These engineers are often experts, but their geographic proximity to their clients is more often their greatest fortune. The process for procuring my service is extraordinarily quick and simple. I embrace business flexibility. All you need to do is send me a brief message on Cad Crowd! When working with me, you get clarity and security. The payments involved are clearly defined upfront. You do not assume the risk that a firm might claim to be starting a project, take a deposit, and then not deliver. There is no reason not to act now. Your co-workers will rave about your success! When firms change engineers during the project, team turnover can put projects of any size at risk. Throughout the process, one or more team members leaving could result in a project failing if the knowledge and talent walk out the door. When working with me, you know that I am going to be the one working on your project from start to finish with an outcome driven mindset. Visit the link below now to check out my website and see why businesses come to me for solutions. I want to help you, but I am a busy guy and do not have much time to add additional projects to my plate. Do not wait until it is too late. Do not continue to struggle day to day to ensure your market dominance and make a sustainable profit. Everyone knows that we needed our independent expert opinion and design solutions yesterday. Make your life easier. Send me a message on Cad Crowd now to get your project started! I will talk to you soon.

Silicon Technologies are a multidisciplinary CAD Outsourcing Production and Project Management Office in Bangalore, Karnataka. We provide GIS, Mapping, Building Services, Mechanical, Electrical, Plu... Read more

Silicon Technologies are a multidisciplinary CAD Outsourcing Production and Project Management Office in Bangalore, Karnataka. We provide GIS, Mapping, Building Services, Mechanical, Electrical, Plumbing, Fire, Hydraulic, Architectural and Civil AutoCAD drafting & Revit modelling support for International Design and Engineering Consultants. Silicon Technologies provide a High Quality, Cost Effective, Flexible and Reliable AutoCAD & Revit Outsourcing service. We can offer both general CAD drawing production, man power supply and CAD project management. ® General CAD Drawing Production ® Quality CAD drafting for basic and detail engineering ® Cost Effective CAD resources ® Fast Turnaround of drawings to meet deadlines ® Flexible & Reliable pool of qualified staff ® Simple & Secure transfer of files between offices ® Manpower supply ® Allocate the dedicated manpower to client for project basis ® Supply of trained technical staff as per the client requirement ® Complete CAD Project Management ® Drawing Setup, Title blocks, layers, blocks (families), external references, view ports, match lines, numbering and drawing titles all managed by Silicon Technologies. ® Quality Assurance procedures are controlled and coordinated by our Q.A Manager. Silicon Technologies documentation ensures the successful flow of information both in-house and between Client offices.

Shahzaib Rehman | Electrical Engineer & CAD Specialist With 7+ years of experience as an Electrical Engineer, I specialize in providing expert consultation and design services for Electrical Drawings... Read more

Shahzaib Rehman | Electrical Engineer & CAD Specialist With 7+ years of experience as an Electrical Engineer, I specialize in providing expert consultation and design services for Electrical Drawings and AutoCAD Electrical projects. My strengths include precise electrical schematics, SOLIDWORKS designs, and customized CAD solutions for mechanical and electrical systems. I’ve led and completed a wide range of projects, from electrical designs for carwashes and UL-compliant solar assembly kits to complex metering switchboard designs. I’m also the founder of SR CAD Works, offering top-tier CAD services for industrial and commercial projects. Let’s work together to bring your project to life!

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentat... Read more

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentation for midstream & downstream systems. I currently am a partner at ENI Drfting & Design providing 2D,3D Design & Drafting services. We look forward in working with you.

▪Total of 10 Years CAD Drafting Experience -10 years modeling & drafting with SolidWorks -9 years modeling & drafting with AUTOCAD Mechanical -2 years modeling & drafting with FastCAD ▪5 Years E... Read more

▪Total of 10 Years CAD Drafting Experience -10 years modeling & drafting with SolidWorks -9 years modeling & drafting with AUTOCAD Mechanical -2 years modeling & drafting with FastCAD ▪5 Years Experience in Flight Simulation Design -control panels -cockpit structure -EIC boxes -manufactured parts & assemblies -screen printed artwork ▪2 Years Experience in Heat Exchanger Design -shutters -main structure -manufactured parts & assemblies ▪2 Years Experience in Industrial Metal Cutting Bandsaw Design -wheel covers -roller tables -manufactured parts & assemblies

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

EICA Estimators & Engineers is an independent freelance construction projects estimating & engineering service provider in Qatar. Our Estimators will provide comprehensive cost estimates for the compl... Read more

EICA Estimators & Engineers is an independent freelance construction projects estimating & engineering service provider in Qatar. Our Estimators will provide comprehensive cost estimates for the complete Electrical, Instrumentation and Control Automation systems associated with Commercial, Residential & Industrial Construction projects. Our Estimators are highly qualified field experienced Engineers with in depth knowledge in Engineering, Design, Construction (both Supervision as well as Project Management). Our estimators have extensive experience in cost estimate preparation, Tender Document preparation, Construction Engineering documents preparation and Quantity survey for small, Medium and Large scale Construction projects either, new builds, extensions, refurbishment projects. Our Estimators have successfully estimated many of construction projects around the country and overseas. Estimation services § Bid &Tender Estimates § Conceptual Estimates § Cost & Value Engineering § Cost Comparisons § MEP/ Electrical Subcontractor Bid Reviews (Scope & Price) § Material Lists § Quantity Takeoffs § Electrical Systems Cost Reduction Alternatives § Cost Estimate Database Development Engineering Services § Design, Construction & Shop drawings preparation § Design calculations preparations § Schematic drawings preparation § Review of Design, Engineering and construction documents. § Detailed scope Matrix preparations § Construction, Testing & Commissioning Method Statement Preparation. § Conceptual Design & FEED § Scope, BOQ & specifications preparation Technical Expertise § Electrical Systems (ELV, LV & MV) § Indoor & Area Lighting systems § Instrumentation Systems § Building & Industrial Automation & Process Control (PLC/SCADA/BMS & DCS) § Structured Cabling & Telecom systems § ELV systems ( Public Addressable, Fire alarm, Audio Visual etc) § Cabling & Earth works § Security & Surveillance Services ( CCTV, Access control etc)

From a young age, I have been fascinated by the power of electricity and its ability to transform the world around us. This fascination led me to pursue a degree in Electrical Engineering. In my curr... Read more

From a young age, I have been fascinated by the power of electricity and its ability to transform the world around us. This fascination led me to pursue a degree in Electrical Engineering. In my current role, I am involved in conducting Electrical Designs & Engineering studies for various Engineering projects that include Power Designs, Control Designs, and Instrumentation Designs for oil & gas plants and other industrial plants. I received recognition for always being on top of deadlines and ensuring client deliverables were on time.

I am an Electrical Engineer who is conversant with all aspects of consultancy works associated with Electrical Services installations including lighting design, small power, raw power and clean power... Read more

I am an Electrical Engineer who is conversant with all aspects of consultancy works associated with Electrical Services installations including lighting design, small power, raw power and clean power installations. Low and Medium Voltage switchgear design and installation, fire alarm detection, structured cabling and security installations. Generator back up design and installation, lifts and escalator installations. This also involves Feasibility Studies and Reports, Planning Proposals, Cost Estimates, Detailed Electrical Services Project Design, Specifications and Bills of Quantities, Contract Management and Cost Control, Preparation and Settlement of Interim and Final Contract Accounts, Site Supervision, Commissioning and Advice on Operation of Plant, Provision of Record Plans, and Maintenance Programmes. Accomplishments • Conducted site assessments of electrical components and • Obtained clients' detailed briefs through collaboration with project managers and architects. • Coordinated project planning and design reviews of Electrical Engineering Works while Liaising with other consultants commissioned to support design works for construction. • Recommended sustainable and cost-effective solutions through the preparation of comprehensive and accurate Project cost Estimates, Technical Specifications and Bills of Quantities of electrical works, • Provided technical support in Tender processes, analysis and Evaluation, Reporting and award of contracts that supported the procurement team. • Spearheaded the Preparation of Interim Valuations, Variation Orders, Final Accounts, and closure documents, including snag lists for Electrical Installations. • Chaired the handover meetings in project initiation and handover stages while delegating tasks with timelines to different teams. • Supervised contractors in the project construction process, monitored site work through site visits, verified and approved material specification and quality during installations, testing and commissioning electrical services. • Executed the project closure process, handing over after the defects liability period and issued high quality related documentation such as as-built drawings, maintenance manuals and product warranties for archiving. • Ensured that all engineering work was carried out as per specifications, statutory requirements, laws, rules, regulations and other contractual requirements, with due regard to safety, operability and maintainability. Key Achievements • Implemented more than 20 energy efficient projects successfully spanning industrial buildings, housing schemes, high-rise office buildings, hospitals, hotels and educational institutions. • Delivered projects worth more than Kshs 40 million in electrical installations project cost. • Addressed simple and complex issues that emerge during a project cycle through work coordination and finding alternative solutions to engineering problems. • Performed value engineering in projects to lower the cost of projects and meet clients’ budgets. • Executed super-quality projects within desired timelines bringing satisfaction to clients.

10 years experience in manufacturing and design in the field of emergency equipment, fire suppression and industrial automation, programming and control. 5 years experience in Solidworks 3D cad. Profi... Read more

10 years experience in manufacturing and design in the field of emergency equipment, fire suppression and industrial automation, programming and control. 5 years experience in Solidworks 3D cad. Proficient in C, C++, Java, Lua, Python, PHP, HTML, CSS and JavaScript.

Experienced design engineer, have developed components from a variety of materials and processes including: Injection molded plastic, sheet metal assemblies, liquid silicone rubber, stampings, insert... Read more

Experienced design engineer, have developed components from a variety of materials and processes including: Injection molded plastic, sheet metal assemblies, liquid silicone rubber, stampings, insert molding, custom electrical connectors, Printed Circuit Boards, Flex Circuits. I have spent my entire career developing electro-mechanical assemblies for the Lithium Ion Battery, and Medical Device Industries. I have designed components manufactured in volumes exceeding 1,000,000 pieces a year, owning the design from prototype to the manufacture of high volume capital tooling.

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road... Read more

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road to become engineer during my studies at Warsaw University of Technology, faculty of Mechatronics. Studies in Poland are not very practical and I always believed that technical experience is priceless for someone who want to become a professional, and most of all, good engineer so I have decided to start work as a Multi Skilled Maintenance Engineer at MPack where I was responsible for electrical and mechanical maintenance of plant machinery. In September 2011 I have progressed to Service Engineer i SZUGAJEW AGRI. As a service Engineer I was responsible for installation of automated lines for grading and packaging of vegetables and fruits. That job involved working with engineering drawings, electrical and mechanical assembly, start ups and running tests of all the installed machines. After that I have started work for CNS Soultions where I have become expert in using Solid Works 3D and Solid Works Electrical. Since I moved to UK on 7th of January 2015 I have started to work as multi skilled designee engineer. My First Engineering job in UK was in IONEX SG where I was responsible for designing container water treatment installation to remove nitrates from drinking water. (Contract - making drawings of 3D assemblies and part models, 2D documentation, pneumatic installations, selecting components, electrical routing, support project from the beginning to the end) Next, I have started working as electro-mechanical engineer in OPTEK SYSTEMS where I was responsible for designing of specialized laser cutting machinery. (Permanent - full electrical design, making drawings of 3D assemblies and part models, 2D documentation, designing safety systems for laboratories, redesigning of the existing laboratories, engineering support for wire man work, start up of machinery, etc. - 3.5 years) Currently for more than 1 year I am on contract in RACE (Remote Applications in Challenging Environment) United Kingdom Atomic Energy Authority where I am working as System Engineer. I am responsible for designing of Safety Systems, LV distribution, supporting of electrical control design, cable tray layouts drawings, cabinet layouts drawing, etc. Curently I am working as a contractor and my contract is 37.5h/ week I am managing to finish my hours in 3.5 days a week so I have a lot of free time now. That is why I have decided to joint that site and look for more opportunities to use time more effective. I hope someone will be interested in my personal skills. Best Regards Michal Panus

An excellent mechatronic engineer with over five (5) years industrial experience in power, telecommunication and manufacturing sector. Diligent in duties with an innovative mind to deliver top notch o... Read more

An excellent mechatronic engineer with over five (5) years industrial experience in power, telecommunication and manufacturing sector. Diligent in duties with an innovative mind to deliver top notch out of the box design services within stipulated time bound.

Technical Abilities: • CAD Software: AutoCAD 2017 (electrical and LT), Solidworks. • Programming Software: Horner APC, Rockwell Studio5000, Connected Components Workbench, RSLogix500. • Misc.: Com... Read more

Technical Abilities: • CAD Software: AutoCAD 2017 (electrical and LT), Solidworks. • Programming Software: Horner APC, Rockwell Studio5000, Connected Components Workbench, RSLogix500. • Misc.: Commissioning, Project Management, Preventive Maintenance Program Set-up, Lockout & Tagout Program Set-up, AutoCad Standards Development. Experience: Versatility Services Inc. Brooksville, FL- Clatskanie, OR President/Owner 10/14 to Present www.versatilityservices.com Small independent system integrator • Applied engineering principles to design, modify and develop facilities, testing, machines, equipment and processes used in processing and manufacturing products. • Analyzed equipment specifications and performance requirements to determine designs to be produced by existing manufacturing and processing facilities and methods. • Analyzed engineering proposals, process requirements and related technical data pertaining to industrial machinery and equipment design. • Determined feasibility of designing new plant equipment and modifying existing facilities, considering costs, available space, time limitations, company planning and other technical and economic factors. • Provided technical information concerning manufacturing and processing techniques, materials, properties and limitations that affected long range plant and product engineering planning. • Studied engineering and technical publications to keep abreast of technological changes and developments in industry. • Program PLC using ladder logic. • Develop HMI screens. • Built custom control panels. • Provided start-up and commissioning services. • Lighting design. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. • Engineer and design PLC based control systems for the industrial market. • Specify instrumentation, estimating, project management, and purchasing. DcR Engineering Services Tampa, FL HT/DcR Engineering Lakeland Senior Electrical Designer 04/05 to 10/14 • Applied engineering principles to design, modify and develop facilities, testing, machines, equipment and processes used in processing and manufacturing products. • Analyzed equipment specifications and performance requirements to determine designs to be produced by existing manufacturing and processing facilities and methods. • Analyzed engineering proposals, process requirements and related technical data pertaining to industrial machinery and equipment design. • Determined feasibility of designing new plant equipment and modifying existing facilities, considering costs, available space, time limitations, company planning and other technical and economic factors. • Provided technical information concerning manufacturing and processing techniques, materials, properties and limitations that affected long range plant and product engineering planning. • Studied engineering and technical publications to keep abreast of technological changes and developments in industry. • Used computer-assisted engineering software and equipment. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. Engineer and design PLC based control systems for the municipal and industrial market. Specify instrumentation, estimating, project management, and purchasing. Rocha Controls Tampa, FL Electrical Designer 11/00 to 12/04 • Applied engineering principles to design, modify and develop facilities, testing, machines, equipment and processes used in processing and manufacturing products. • Analyzed equipment specifications and performance requirements to determine designs to be produced by existing manufacturing and processing facilities and methods. • Analyzed engineering proposals, process requirements and related technical data pertaining to industrial machinery and equipment design. • Determined feasibility of designing new plant equipment and modifying existing facilities, considering costs, available space, time limitations, company planning and other technical and economic factors. • Provided technical information concerning manufacturing and processing techniques, materials, properties and limitations that affected long range plant and product engineering planning. • Studied engineering and technical publications to keep abreast of technological changes and developments in industry. • Used computer-assisted engineering software and equipment. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. Engineer and design PLC based control systems for the municipal and industrial market. Specify instrumentation, estimating, project management, and purchasing. Central Power & Lime Brooksville, FL Electrician 02/00 to 11/00 • Repaired and maintained electrical equipment in generating station and powerhouse. • Tested defective equipment to determine cause of malfunctions and failures, using voltmeters, ammeters and related electrical testing apparatus. • Repaired and replaced equipment, such as relays, switches, supervisory controls and indicating and recording instruments. • Tested and repaired switchboard and equipment circuitry, interpreting wiring diagrams to trace and connect numerous wires carrying currents for independent functions. • Cleaned and repaired brushes, commutators, windings and bearings of generators, motors and converters. • Successfully handled converting blueprints to Autocad format. • Walked down existing installations and created red-line as-built drawings. • Updated existing CAD files to reflect current state of systems accurately. Universal Studios Escape Orlando, FL Animation/Show Control Technician 04/99 to 02/00 Troubleshoot, repair, and performed preventative maintenance on various PLC controlled systems including a rollercoater, a stunt show, and a state of the art special effects show. Worked on Allen-Bradley soft start controllers, variable frequency drives, electro-hydraulic and pnuematic equipment. Schenctady International Inc. Schenectady, NY Electrician 03/95 to 03/99 • Installed and repaired electrical systems, apparatuses and electrical and electronic components of industrial machinery and equipment. • Installed power supply wiring and conduit for newly installed machines and equipment, such as robots, conveyors and programmable controllers. • Connected power supply wires to machines and equipment and connected cables and wires between machines and equipment. • Diagnosed malfunctioning apparatuses, such as transformers, motors and lighting fixtures, using test equipment. • Tested malfunctioning machinery and discussed malfunctions with other maintenance workers. • Visually inspected and listened to machines and equipment to locate causes of malfunctions. • Dismantled machines and equipment to gain access to problem areas. • Replaced faulty electrical components of machine, such as relays, switches and motors and positioned sensing devices. • Planned layout of wiring and installed wiring, conduit and electrical apparatuses in buildings.