Hire the best freelance Manuals and Documentation expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I consider myself a very curious and persistent person, who stands for challenges and new knowledge.I work and live in Serbia. I am 10 years old in the process of manufacturing and processing metal pr... Read more

I consider myself a very curious and persistent person, who stands for challenges and new knowledge.I work and live in Serbia. I am 10 years old in the process of manufacturing and processing metal products. My job is to create products according to customer requirements, and to make all the technical documentation for making and making myself tailor-made for machines.In addition, I worked on designing and making tools and machines.I design all prototypes in Autodesk Inventor.

Thanos Ziozias, industrial designer, studied at the School of Mechanical and Aeronautical Engineering, University of Patras with specialization in manufacturing department and industrial design. In 2... Read more

Thanos Ziozias, industrial designer, studied at the School of Mechanical and Aeronautical Engineering, University of Patras with specialization in manufacturing department and industrial design. In 2006 he has founded "ΜΑΖΙ Product + Customized Design" in Athens-Greece where he provides industrial and technical design services in Greece and abroad. Ultimate aim is to offer you everything you will need for an innovative, successful and market compatible product development the soonest possible. He undertake the full design of new products or customized constructions, regardless its complexity and difficulty, with primary aspiration to achieve the perfect combination of ergonomy, usability, aesthetic and viability of the product. Complete technical and consulting services in every stage of the product development, from the creative idea, to the product design till the process of the manufacturing in scale and the packaging. In parallel with the ongoing process of the 3D – 2D design and the creation of the 3D printed prototype, along with partners, can design the product’s brand in accordance with all of its requirements. During the last few years, he has built strong long lasting collaborations with leading companies in plastic and consumer goods industry, advertising agencies, architects, construction and ship repair companies. He is also one of the top advanced certified 3d surface designers in Greece.

Over 20 years experience in mechanical engineering. Technical skills: cranes and lifting, material handling, shredding and crushing equipment, mechatronics, piping and valves, pressure equipment, mach... Read more

Over 20 years experience in mechanical engineering. Technical skills: cranes and lifting, material handling, shredding and crushing equipment, mechatronics, piping and valves, pressure equipment, machine design.

I am Mechanical Engineer. Graduated in 2014. Participated in shell Eco Marathon Asia for the design and development of urban concept vehicle and attained 3rd rank in Pakistan and 7th in Asia. I have o... Read more

I am Mechanical Engineer. Graduated in 2014. Participated in shell Eco Marathon Asia for the design and development of urban concept vehicle and attained 3rd rank in Pakistan and 7th in Asia. I have over 1.5 yrs experience in modeling of design components on Creo Parametric. Also i am employed in prestigious R&D organization in Pakistan.

I am a Product and Mechanical Designer. Much of my career is involved in computer aided design of components for the aerospace, transportation and medical device industries. I am also a US Navy vetera... Read more

I am a Product and Mechanical Designer. Much of my career is involved in computer aided design of components for the aerospace, transportation and medical device industries. I am also a US Navy veteran.   While working at United Launch Alliance (ULA) I supplied 3D CAD models from the engineering group to the tooling supplier enabling concurrent design of manufacturing tooling. I also supported the ordnance group by designing a stage separation component test stand.   I have also designed more than 450 FAA certified components for the Adam A500 aircraft. I find that wherever I have worked, I bring three key strengths to the table: CAD expertise, component design and invariably I have gained a reputation as the GoTo guy to support high value projects.   I have a passion for designing products that are making a positive impact on the environment. On my personal time I have designed concepts for Smoker, furniture and environmentally friendly lawn and garden power equipment. I am looking for a position that uses my skills, experiences and passion for product design to support your engineering group.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY ! Read more

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

I'm an electromechaical engineer I worked 3 years in oil field as production operator and more than years in machine design using solidworks Read more

I'm an electromechaical engineer I worked 3 years in oil field as production operator and more than years in machine design using solidworks

Hey! I am Syed Mansoor Ali, basically i belong to mechanical engineering. And I'm engrossed in designing since the beginning of college. Till this date I'm having a great experience in designing. I ca... Read more

Hey! I am Syed Mansoor Ali, basically i belong to mechanical engineering. And I'm engrossed in designing since the beginning of college. Till this date I'm having a great experience in designing. I can design various types of machine parts, can modify them and so on.

I like much what I do and I can help you with great project Read more

I like much what I do and I can help you with great project

Passionate and quality driven to the core Read more

Passionate and quality driven to the core

I graduated with a Master degree in Mechanical Engineering (Focused on Fluid Mechanics) at University of Nancy, France in 2009. To accomplish my studies, I did my master thesis at the University of Ca... Read more

I graduated with a Master degree in Mechanical Engineering (Focused on Fluid Mechanics) at University of Nancy, France in 2009. To accomplish my studies, I did my master thesis at the University of Canterbury (Christchurch), where I worked on a problem of fluid structure interaction (FEA Simulation). After working on Different projects in France (Construction, Airbus, Airbags), I decided to move to New Zealand in 2015 where I gained more experience in product design. I worked for a company making industrial shade products, and then I spend 3 years designing industrial spraying system worth 400 000 euros. I am now looking for new challenges.

Am a PhD student and spend my free time as a freelancer. My primary expertise is in seismic safety assessment of dams in conjunction with skills that I learned along the way such as multi-fidelity mod... Read more

Am a PhD student and spend my free time as a freelancer. My primary expertise is in seismic safety assessment of dams in conjunction with skills that I learned along the way such as multi-fidelity modeling, fracture analysis, etc. Am also familiar with ICS/SCADA and industrial cybersecurity to the point where I am currently setting up my own online course.

Mechanical Engineer with 15+ years of experience in New Product Design &Development, Plastic parts design, tool design, should costing, value engineering, Electromechanical Design, Enclosure Design, P... Read more

Mechanical Engineer with 15+ years of experience in New Product Design &Development, Plastic parts design, tool design, should costing, value engineering, Electromechanical Design, Enclosure Design, Predictive Analysis Program Management. Product design for North American and Indian Market. Experienced in special purpose machines design, mechanisms design, jigs, and fixtures design. A Certified Six Sigma Green Belt, have sound knowledge of Six Sigma tools, competitor analysis & NPI tools (extensive experience for Global markets of US, China & India). A balance of Strong Engineering & Program Management skills along with expertise in leading the design team & working with cross-functional teams.

Research and Development engineer with a background in medical and non-medical device design, production, testing and usage. Read more

Research and Development engineer with a background in medical and non-medical device design, production, testing and usage.

About: Aloha, my name is Stu! I am a user experienced focused product designer and systems engineer addicted to creating products and services that will change the world. I am always on the hunt to b... Read more

About: Aloha, my name is Stu! I am a user experienced focused product designer and systems engineer addicted to creating products and services that will change the world. I am always on the hunt to be apart of projects and teams that will create massive change and potentially impact over a billion lives. My personal mission is to create world class experiences through exponential technology that empowers the lives of over one billion people to achieve their greatest potential. Experience & Differentiation: Electro-mechanical/Mechatronics design Consumer product development IOT Product Development Drawing/Drafting and manufacturability for mass production International & domestic (US) manufacturing User Experience Focused Industries Served: Health and fitness, breweries, medical device manufacturing, ice sculpting, immersive entertainment, solar energy sector, and sailing. Design Skills: 3D Modeling, Injection molding, sheet metal, machining, weldments, aluminum extrusion, assembly, 3D printing, BOM Management, Design for Manufacturability and User Experience, DFM Preferred CAD Software: Solidworks I look forward to meeting and working with clients that share the same passion to change and impact the world through new product development.

Professional engineer with fourteen years of experience in the manufacturing and design sector. Great ability to organize and manage projects with a success driven, team-oriented attitude.Well rounded... Read more

Professional engineer with fourteen years of experience in the manufacturing and design sector. Great ability to organize and manage projects with a success driven, team-oriented attitude.Well rounded engineer with a creative approach to problem solving and design.

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed e... Read more

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed electro-mechanical products, machinery and systems for a wide variety of industries. Generated winning proposals and developed customer relationships. Innovative conceptual designer. Inventor of patented industrial machinery products. Solid track record leading profitable new product development. Registered Professional Engineer. Specialties: Machine designer with proven abilities to drive innovative new product development

Skilled Drafter with unique experience in the engineering and architecture fields. Detail-oriented with a keen eye for precision and a passion for creating accurate and visually appealing technical d... Read more

Skilled Drafter with unique experience in the engineering and architecture fields. Detail-oriented with a keen eye for precision and a passion for creating accurate and visually appealing technical drawings to industry standards and best practices. Proficient in Solidworks, AutoCAD, and Revit. Excels in team collaboration to deliver high-quality projects on time and within budget.

I'm mechanical engineer with experience in component and system design, manufacturing, and product testing. 3D modeling, 3D printing, and rapid prototype development are some of my areas of interest,... Read more

I'm mechanical engineer with experience in component and system design, manufacturing, and product testing. 3D modeling, 3D printing, and rapid prototype development are some of my areas of interest, and where I am focusing my time. I love sports, learning about new technologies, and spending time outdoors with my family.

- SWPPP Stormwater Pollution Prevention Plan Developer -Provides site information for civil plans or SWPPP development for engineering, geological, and hydrology firm -Independently develops SWPPPs fo... Read more

- SWPPP Stormwater Pollution Prevention Plan Developer -Provides site information for civil plans or SWPPP development for engineering, geological, and hydrology firm -Independently develops SWPPPs for construction sites -NPDES and State Stormwater permitting -Researches and provides permitting and regulatory information to clients

- Currently living in Turkey, studying, and working part-time with job with Raykar Systems Sanayi ve Ticaret Ltd. Sti. as Design Engineer. - Area of expertise include Project Managements, Quality Ass... Read more

- Currently living in Turkey, studying, and working part-time with job with Raykar Systems Sanayi ve Ticaret Ltd. Sti. as Design Engineer. - Area of expertise include Project Managements, Quality Assurance, Statistical Analysis, 3D modelling on CAD software. - 6 Years of Experience in MNC's like Bosch Turkey, Uniparts Group, India. Examples of my work- I have produced all the contents in this website. https://raykar.com.tr/ https://raykar.com.tr/products/detail/silah-ve-ekipman-dolabi

A Versatile, highly analytical, creative individual with experience as a R&D Mechanical Design Engineer and 2 Masters Degrees in Mechanical & Electrical Engineering. I have worked in various industr... Read more

A Versatile, highly analytical, creative individual with experience as a R&D Mechanical Design Engineer and 2 Masters Degrees in Mechanical & Electrical Engineering. I have worked in various industries and projects, always achieving more than expected going a step further. I can do Mechanical Design of various products/machines/systems, FEA Analysis, Manuals & Documentations of these products as well as renderings. I also can simulate various problems using Matlab Programming, if this is needed. My experience as well as extensive studies in Engineering enable me to view products/projects from various perspectives, and therefore am able to provide better & more complete solutions.

Mechatronic Engineer with experience in mechanical design, manufacturing process, 3D modeling, reverse engineering, 2D drawing, 3D design and information specs, and bill of materials. Intermediate pro... Read more

Mechatronic Engineer with experience in mechanical design, manufacturing process, 3D modeling, reverse engineering, 2D drawing, 3D design and information specs, and bill of materials. Intermediate proficiency in Solidworks. I've worked at the metallurgical industry creating and design devices and repairs of shot blasting machines.

I work for a small research and development company as an engineer. In this role I do a plethora of jobs depending on the project. In the most recent project I was in charge of designing, drawing a... Read more

I work for a small research and development company as an engineer. In this role I do a plethora of jobs depending on the project. In the most recent project I was in charge of designing, drawing and dimensioning secondary components for an engine our client needed. This evolved into the development of a viable test bed for this engine. This also included the creation of an acceptance test plan as well as a technical manual for assembly. My goal is to develop and design what you need in a timely manner while keeping to the requirements set forth by you. I and open and happily work with other freelancers if needed I look forward to hearing from you.

If you are looking someone to take: - that doodle on your napkin and make 2D and/or 3D models - your existing product and make changes as needed - convert your 2D to 3D and vice versa - create templat... Read more

If you are looking someone to take: - that doodle on your napkin and make 2D and/or 3D models - your existing product and make changes as needed - convert your 2D to 3D and vice versa - create templates, work instructions and other documents - create Excel spreadsheet to meet your needs - work with your data, to clean it, to present it and make use of it I have worked with SolidWorks, AutoCad, Autodesk Inventor, so no matter what your design needs are I can make it happen I can also work with your internal PDM/vault/design systems to help you with the sudden/seasonal design load As an added bonus I am very good with data and Excel spreadsheet, would be more than happy to assist in any related work

4 years’ experience at a Danaher Co-op out of Valencia, CA Product Design in Solidworks: - Industrial Control Panels - Industrial Cabinet Enclosures - Embedded Controllers - Name Brand PLC's S... Read more

4 years’ experience at a Danaher Co-op out of Valencia, CA Product Design in Solidworks: - Industrial Control Panels - Industrial Cabinet Enclosures - Embedded Controllers - Name Brand PLC's Solutions - Analog and Digital Circuits for Sensing and Control - Wire Harnesses - Compliance conscious of cULus, CSA, CE, IEC, Quality Engineering Support: - ISO9001 Experience - Develop Customized Test Methods - In-Process Poka-Yokes - Specialized Jigs and Fixtures - Audit Outside Processes Resource for Organizational Development: - Data-driven action plans to improve Standard Work and Lead Time Reduction - Support the preparation for Kaizen Events (Pre-Event) or assist the completion of action items (Post-Event) - Document new manufacturing processes, methods, and equipment requirements into appropriate PAAG (Process at a Glance) or ISO required documentation - Implement changes to products and processes - Maintain regulatory compliance and certifications