Hire the best freelance System Modeling expert designers for your company

I am a Mechanical and Thermal Engineer with experience both in research and industry with specialty in Computer Aided Engineering (CAE) including CAD, CFD, and FEA. Read more

I am a Mechanical and Thermal Engineer with experience both in research and industry with specialty in Computer Aided Engineering (CAE) including CAD, CFD, and FEA.

I'm Mehdi Khan, a Marine System Designer with a specialization in mechanical system design. Over the course of my academic experience, I've had the opportunity to work on different projects related to... Read more

I'm Mehdi Khan, a Marine System Designer with a specialization in mechanical system design. Over the course of my academic experience, I've had the opportunity to work on different projects related to the design of various auxiliary systems of ships, including fuel systems, lube oil systems, and propulsion systems, and have conducted analysis on propulsion technology for 105m Arctic OPVs. I'm proficient in using different software programs such as AutoCAD, Rhino, SolidWorks, GHS, and Matlab, which allows me to provide clients with a comprehensive range of services. Currently, I'm working on a project that involves 3D modeling of an engine room for a 105m Arctic OPV, based on ice-breaking safety regulations from Lloyd's Registrar. My expertise in marine engineering and naval architecture allows me to provide detailed analysis and comprehensive design solutions. As a Marine System Designer, I am committed to providing clients with the best possible solutions that meet their specific needs. Clients can expect a high level of expertise, not only limited to marine system design but also different mechanical piping system, and a dedication to delivering exceptional results.

Extensively worked on Power system Studies like Load Flow Analysis, Short Circuit Study, Relay Coordination, Transient Stability Study and Motor Staring Study in ETAPfor Industries and Power Plant.... Read more

Extensively worked on Power system Studies like Load Flow Analysis, Short Circuit Study, Relay Coordination, Transient Stability Study and Motor Staring Study in ETAPfor Industries and Power Plant. Design and analysis of electrical system. Equipment Sizing for Transformer, Circuit Breaker, Cable, Bus Bar, Batteries, CT, etc., Protection and Co-ordination Review for electrical equipment. Vendor Document Review for Switchgears. Specification and testing of electrical equipment for desired rating. Conduct feasibility studies and testing on new and modified designs. Provide design information to drafting for documentation. Work knowledge and experience on ETAP, PSCAD, ATP, EMTP, AUTOCAD and DIALUX and PVsyst Software. R&D in Power demand projections and Infrastructure planning along with preparation of report. Trained on GIS,AIS,ATP, Lightning Protection, Testing of equipment and SCADA Control.

Independent contractor offering product design and mechanical engineering services. Creative, self-starting, and driven with 11 years of experience in both industry and research. Strength in product d... Read more

Independent contractor offering product design and mechanical engineering services. Creative, self-starting, and driven with 11 years of experience in both industry and research. Strength in product design from concept to production including overseas manufacturing, system modeling and simulation, prototyping, design for manufacturing, and statistical process control. Versed in the product development cycle, machine design, prototyping to bridge to high volume manufacturing, 3D printing, printing, energy harvesting, CAD, 3D scanning, acoustics, mechatronics. Enthusiastic drive for quality, efficiency, and innovation.

Hello my name is Alex, I began my path as an engineer in 2013 when I began school. From the very beginning learning and utilizing the various software available to us (mainly CAD and Matlab) was very... Read more

Hello my name is Alex, I began my path as an engineer in 2013 when I began school. From the very beginning learning and utilizing the various software available to us (mainly CAD and Matlab) was very central to my education. Beyond that I have done countless projects utilizing these skills and feel extremely comfortable tackling on any challenge. On top of designing and prototyping, my main skills focus on system modeling and dynamics, whether it is mechanical, thermal, fluid, pnuematic, in nature. For this reason I can also provide FEA/FEM solutions to many problems. Matlab is second nature to me, for those that require mathematical and control based solutions to their challenges.

Electrical | Low Voltage ELV | Solar System | Automation Solutions | Network | Telecommunication Expert Design Engineer I am a low voltage engineer with a strong focus on electrical systems design. M... Read more

Electrical | Low Voltage ELV | Solar System | Automation Solutions | Network | Telecommunication Expert Design Engineer I am a low voltage engineer with a strong focus on electrical systems design. My expertise lies in creating efficient, innovative designs for low voltage solutions that optimize energy use and integrate renewable technologies. I am skilled in project planning, system modeling, and technical documentation, ensuring that my designs not only meet regulatory standards but also deliver practical, high-quality results for clients. Additionally, I bring specialized skills in solar energy design and simulation, utilizing PVsyst for renewable energy projects. My technical skills include designing low current and electrical systems, troubleshooting, and overseeing installations, all tailored to help clients achieve their project goals through customized, cost-effective solutions. ⭐⭐⭐⭐⭐Below are the precise services I offer:⭐⭐⭐⭐⭐ ✅ Fire Detection System ✅ Fire Safety System ✅ Gas Extinguishing System ✅ Intercom System ✅ Simultaneous Translation System ✅ IPTV and Collective TV System ✅ IP & Analog Telephone System (VDI) ✅ Video Surveillance System ✅ Access Control System ✅ Professional Intrusion Detection System ✅ Public Address System ✅ Voice Evacuation System ✅ Parking Management System ✅ Nurse Call System ✅ Queue Management System ✅ Clock System ✅ Video Conferencing System ✅ Video Wall Display System ✅ Fiber Optic Interconnection (FTTH) ✅ Wi-Fi Network Design and Installation (AP placement, heatmaps, and coverage witch software ) ✅ Solar Energy System Design ✅ Home Automation Systems (KNX) ✅ Network Engineering ✅Software: MS Office , AutoCAD, DiaLUX, BleauBeam ,PVSyst , Photoshop , SketchUp ,Ekahau AI Pro ⭐⭐Skills and Deliverables⭐⭐ ⭐Skills: System Design Electrical and Low Current Systems Engineering AutoCAD 2D Drafting Solar Energy Design & PVsyst Simulation Security Systems Planning Wiring Diagrams and Schematics Technical Documentation Project Management (optional) ⭐Deliverables: Detailed system layout and positioning Complete AutoCAD drawings of the system design Electrical wiring schematics for camera connections Equipment placement and specifications Bill of Materials (BOM) (if applicable) PDF and DWG file formats

I am a Mechanical Engineer from Nepal with an an expertise in conceptualizing mechanisms, especially for automation and robotics and industrial product design. I was recently declared the winner i... Read more

I am a Mechanical Engineer from Nepal with an an expertise in conceptualizing mechanisms, especially for automation and robotics and industrial product design. I was recently declared the winner in the ASME/Grabcad Design for Social impact challenge. 4 years of experience working at the Robotics Club in my campus, designing and building components for the robots competing in international competitions, in particular, the ABU Robocon has made me committed to this career. I consider myself a creative thinker and a perfection seeker. No matter who I'm working for, when I am given a design problem, I am unable to rest until I've found a satisfying and seemingly optimal solution. I like taking inspirations from things that are around me and other things that I've recently encountered. I am trying to collect money for attending conferences to showcase some of the research I have been a part of. I really feel people must stop looking Freelancing with their dark eyes as more creative bombshells and intelligent manpower are welcoming it as a preferred work culture. My selling qualities: - Loves bringing up innovative and creative design solutions - Experienced in working effectively under pressure - Mathematical System Modeling - Practical/ Field Experience in 3D Printing/Laser Cutting/Manufacturable Design - I use Solidworks because I love it, not because I have to. - Upbeat Performer - Hundreds of part made for fabrication - Worked with complex assemblies I can work for 6 hours a day from 8:00 PM to 12:00 AM & 5:00 AM to 7:00 AM

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and contr... Read more

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and control theory to make superb applications and products. The name of the game is successful integration between different domains, which is a missing skill searched by many engineers, and needed by many Start-ups. I am new here, but I have finished more than 60 freelancing tasks and missions in other sites. I have used PIC microcontroller and Arduino to implement so many projects, and I have even used them to make commercial products. I have the talent of integrating embedded systems with electronics and GUI interface to make a complete application. I used microcontrollers in applications like: Sensors Interfacing (GPS-Motion-Encoder-Light-Temperature-Level-Pressure-Vibration-Position) - CNC machine control - Proportional and on/off temperature controllers - Level controller - Power metering IC interfacing (Experience with ADE7953) - Wifi & IoT - GSM - SD card interfacing. Moreover, I have experinece in making integrated system between Raspberry pi and Arduino for applications that need so. Moreover, I have made many projects that involve signal electronics, power electronics, sensors and measuring systems, and signal conditioning. In addition, I and my team can give you support if you want a PCB design and soldering for your circuit. Regarding control and automation, I am finished master study in automatic control theory, and I have experience in designing embedded controllers - automatic control theory and applications - adaptive control - autotuners - system modeling & simulation- system Identification and parameters estimation - system dynamic response analysis - pole placement controllers - PID controllers - Scilab & Matlab software packages . In addition, I can give you support in PLC systems and ladder diagram programs for controlling industrial processes. In addition, I am using Java as GUI interface for my applications, so I have experience in how to make a java GUI program and to control an embedded system using it. I made several projects where I used Java to monitor sensor values, or to send control commands to electronic circuits. ِAlso I have worked before with Java libraries that serve scientific applications, like EJML matrix algebra library, JArduino (java for arduino) library, JFreeChart plotting library, ImageJ image processing libary, RXTX serial communication library, etc...

I am Prince Jimmy, a mechanical design Engineer (Project specialist), with a multinational company in Lagos, am also a freelance Design Engineering Consultant. I wish to share with you my area of exp... Read more

I am Prince Jimmy, a mechanical design Engineer (Project specialist), with a multinational company in Lagos, am also a freelance Design Engineering Consultant. I wish to share with you my area of expertise and services I can render to you professionally; I ensure total client satisfaction and prompt delivery within the agreed dateline. I have a team of professional design Engineers who I work together to ensure client total satisfaction. My services include: § CAD DESIGN AND DETAILING § 3D PRINTING AND PROTOTYPING § NEW PRODUCT DEVELOPMENT § SHEET-METAL DESIGN § MOULD AND CAVITY DESIGN § FEA & CFD modelling § PIPING DESIGN AND ISOMETRIC PRESENTATION § FIRE FIGHTING SYSTEM DESIGN § PLUMBING DESIGN § HVAC SYSTEM DESIGN AND DRAFTING WITH REVIT § MACHINE PARTS AND ASSEMBLING DESIGN AND MODELLING § PROJECT PLANNING AND SCHEDULING. § CNC coding

My main responsibilities to design and model parts of machines or even complete machines in different scales, related to mechanical engineering field, using different CAD software such as: SolidWorks,... Read more

My main responsibilities to design and model parts of machines or even complete machines in different scales, related to mechanical engineering field, using different CAD software such as: SolidWorks, Autocad, and ANSYS Workbench. I am also familiar with valve design, industrial processes, heat exchanges, pressure vessels, risk analysis,non-destructive testing,asset integrity,renewable energy design and 3D modeling. I always strive to clearly understand my customer's needs before starting any project to make sure we are aligned on what the final product should be. I look forward to our first conversation

Designing high voltage substations AIS and GIS, HVDC converter stations, renewable energies, heavy industry electrical and control projects, primary and secondary projects Read more

Designing high voltage substations AIS and GIS, HVDC converter stations, renewable energies, heavy industry electrical and control projects, primary and secondary projects

I have worked for many years on various boat design and ship design projects. I am a qualified Naval Arch. I expert in design, modeling and naval architecture anslysis Read more

I have worked for many years on various boat design and ship design projects. I am a qualified Naval Arch. I expert in design, modeling and naval architecture anslysis

I am a Mechanical Engineering graduate with over 30 years of experience in Machine Design, Automation, Concept/Product Development and Engineering solutions. In addition to my knowledge of core Mechan... Read more

I am a Mechanical Engineering graduate with over 30 years of experience in Machine Design, Automation, Concept/Product Development and Engineering solutions. In addition to my knowledge of core Mechanical Engineering including Manufacturing and Quality Systems I have exposure to other areas like Electrical and Electronics, ERP and Information Technology. This gives me an advantage when there is a requirement of integrating expertise from those areas for execution of projects/assignments. Professional Strengths: - Extensive experience in sophisticated and high precision Machine Design and product development - CNC, PLC controlled and Conventional Machine tools and accessories, Process machinery and Automation. - Experience in Subsystems designs - Hydraulics, Pneumatics and Sheet-metal cladding. - Hands on experience in CAD tools - AutoCAD, SolidWorks and Pro/ENGINEER (Creo Parametric) - Knowledge of PDM/PLM systems like DBWorks and Windchill. - Experience complying with Quality systems like ISO 9001:2008, ISO 14000 - Knowledge of ERP system, SAP R/3 - Hands on experience on System design platform – NI LabVIEW Developer Suite, for developing application software, with building systems for testing, data logging and analysis, using DAQ hardware. - Working knowledge of software- C, C++ - Good analytical ability, cross-functional integration and teaming skills.

I'm mechanical engineer with experience in component and system design, manufacturing, and product testing. 3D modeling, 3D printing, and rapid prototype development are some of my areas of interest,... Read more

I'm mechanical engineer with experience in component and system design, manufacturing, and product testing. 3D modeling, 3D printing, and rapid prototype development are some of my areas of interest, and where I am focusing my time. I love sports, learning about new technologies, and spending time outdoors with my family.

Hi.!! This is Logesh Raja. I am a Certified Solidworks Professional certified by Dassault System. I have 5 years of hand on experience in Soliworks. Presently i am working as a Design Engineer in a re... Read more

Hi.!! This is Logesh Raja. I am a Certified Solidworks Professional certified by Dassault System. I have 5 years of hand on experience in Soliworks. Presently i am working as a Design Engineer in a reputed Company. I am good in product designing also. But I am new to this freelancing job but not to this field. If you work with me once, then you will always work with me in future. I can complete your work in stipulated time. Hire me, Lets work together.

I am a qualified Mechanical Engineering Technician, I have a combined work experience of more than 4 (four) years in both the FMCG/ Food and Beverage and Steel manufacturing industry. My areas of e... Read more

I am a qualified Mechanical Engineering Technician, I have a combined work experience of more than 4 (four) years in both the FMCG/ Food and Beverage and Steel manufacturing industry. My areas of expertise are specifically in Project Management, Systems and product design, General mechanical engineering and 2D draughting. I have worked on projects ranging up to ZAR 90 000 in value and have managed to design, impliments and successfully commission 3 new system projects in 1 years, reducing operational costs by up to 20%.

I am a CAD operator with a NICET IV certification in Fire Alarm Systems and an associate’s degree from ITT Tech in Computer-Aided Drafting and Design. Since 1998 I have had experience with a fire spri... Read more

I am a CAD operator with a NICET IV certification in Fire Alarm Systems and an associate’s degree from ITT Tech in Computer-Aided Drafting and Design. Since 1998 I have had experience with a fire sprinkler design firm, MPE engineering firms, and fire alarm contractors. I have experience with fire alarm systems design in small tenant improvements to multi-million dollar government installations and everything in-between. I am mainly looking to do small to medium fire alarm designs, security system designs, create cad drawings from sketches, convert printed drawings to cad, redlines or As-Built documentation.

I am a Mechanical Engineer. I have good hands-on 3d modeling software like CATIA, SOLIDWORKS, CREO, AUTOCAD, ANSYS, ADAMS, MASTERCAM, MAYA, BLENDER, etc. I am good at designing automotive parts. I hav... Read more

I am a Mechanical Engineer. I have good hands-on 3d modeling software like CATIA, SOLIDWORKS, CREO, AUTOCAD, ANSYS, ADAMS, MASTERCAM, MAYA, BLENDER, etc. I am good at designing automotive parts. I have experience in designing two ATVs, one autonomous planting machines. I am a Dassault system certified SolidWorks associate in mechanical design, so you can trust my designing skills.

Hi I'm RATHESH KUMAR, I am a professional 3D/CAD modeler and product & industrial & mechanical designer. I have 21 more years of experience working in CAD drafting and 3D modelling. The services I off... Read more

Hi I'm RATHESH KUMAR, I am a professional 3D/CAD modeler and product & industrial & mechanical designer. I have 21 more years of experience working in CAD drafting and 3D modelling. The services I offer include: ?SOLIDWORKS/AUTOCAD/KEYSHOT/3DS MAX/PHOTOSHOP? ⭐Design complicated parts, assemblies system(whatever you want) & 3D model based on your sketches, drawings, pictures or just fantastic ideas. ⭐ Creating set of manufacturing drawings based on 3D models/assemblies. ⭐ Transform 2D drawing to 3D model. ⭐ Creating flat panel for sheet metal. ⭐ Converting STL files to solid models (STEP, IGS, X_T) for mold. ⭐ Creating STL, IGES and STEP files for 3D printing. ⭐ Creating DXF files for CNC/Laser/Plasma cutting. ⭐ 2D CAD drafting in AutoCAD (architectural and technical drawings, converting from pdf/images to AutoCAD). I can provide to you all what you need from a concept to perfect manufacturing drawings and rendering & logo for business. I accept offers that I'm certainly able to finish, so once you hire me - you won't just waste your time. Don't be afraid to contact me in chat - I'll answer all your questions. Kindly check my portfolio and feedback below. Best regards.

i am mechanical design engineer working on solidworks and autocad software i have good knowledge and experience of designing on industrial plant, pollution control system, and Machines mechanism, i a... Read more

i am mechanical design engineer working on solidworks and autocad software i have good knowledge and experience of designing on industrial plant, pollution control system, and Machines mechanism, i am able to make 3d model, rendering, static analysis, flow simulation, motion study on movable mechanism and i can make 2d shop floor drawings for manufacturing and fabrication purpose for more information you can see my work and my skill on below link https://drive.google.com/folderview?id=1Apsi0lFXVuDys6CendaifqlANqWeKrtg

● Skilled mechanical design engineer with almost 3 years of experience in the Automobile & Mechanical Industry. Familiar with Engine and vehicle testing systems. ● Area of expertise includes 3D cad m... Read more

● Skilled mechanical design engineer with almost 3 years of experience in the Automobile & Mechanical Industry. Familiar with Engine and vehicle testing systems. ● Area of expertise includes 3D cad modeling of Spline, gears, sprocket, casting, machining, and sheet metal parts, handling larger assemblies, surfacing, framework, creating a family table for standard parts, and calculation-based designing. ● Drafting manufacturing drawings with GD &T symbols, fitments system, and tolerances as per ASME 14.1, ISO 2768-MK, and other international standards.

I'm a Civil engineer, structural and architectural Revit drafter. I have a 4 years experience in BIM service, I've worked with Revit, naviasworks and primavera to produce a 5d building in both stru... Read more

I'm a Civil engineer, structural and architectural Revit drafter. I have a 4 years experience in BIM service, I've worked with Revit, naviasworks and primavera to produce a 5d building in both structural and architectural drawings with a specific coordination system. I can receive your projects in JPG or DWG. I've worked in construction management for 2 years as a planner engineer for 2 years with primvera. Most of projects that have an ordinary building took about 3 days to produce a full 3d model in Revit and a full BOQ Excel sheet for all elements in the project and full structural sheets of the project. I work with common softwares as: Autodesk Revit, Autodesk naviasworks, oracle primavera, Microsoft office programs, AutoCAD, Sap2000 and an introduction in Dynamo. I'm full ready to apply my experience and knowledge in this way.

Experienced engineer with over 10 years experience as a product development design engineer. I utilize the latest version of SolidWorks 3D modeling software to build, analyze, test and generate profes... Read more

Experienced engineer with over 10 years experience as a product development design engineer. I utilize the latest version of SolidWorks 3D modeling software to build, analyze, test and generate professional engineering drawings. I also assist in the prototype phase in order to make sure that first article built is errors free and is ready for next phase of production. EDUCATION San Jose State University, San JoseBachelors, Mechanical Engineering, 2000Design concentration. Sierra Academy of Aeronautics, Oakland, CACertificate, Technician, 1992 EXPERIENCE Fluid Components International, CaProduct Development Engineer 08/2010 – Present• Design and test new enclosure assembly for new product. • Conduct preliminary testing for CRN, FM and ATEX approvals.• Responsible for generating engineering drawings.• Supervise SolidWorks drafter. Flowserve Co, Vernon, CaProject Engineer 05/2006 – 04/2009• Study customer data sheet and scope of supply. • Generate pump configuration layout and initiate an engineering design review (phase gate 2). • Interface with project managers, customers and vendors throughout the project cycle.• Troubleshoot all incurring issues during the build phase ECO’s, NCR’s, SDR’s.• Use Agile (Product Lifecycle Management) to create & update parts, drawings and BOM’s.• Collaborate with engineering group to streamline design process and lower cost of reworking pumps after testing. Energy innovations, Pasadena, CaMechanical Engineer, 10/2005-01-2006• Collaborated in refining and redesigning components of state of the art solar panel.• Used Solidworks and PDMworks to process and document drawings. Wetdesign corp, Burbank, CaMechanical Engineer, 01/2005 – 08-2005• Involved in the design and development of a water delivery, from concept to prototype to single article using Solidworks 3D design package.• Interface with material engineers to choose the right material for bearings, shaft, gaskets, etc.• Continued involvement with multiple projects. Fluid research, Tustin, CAMechanical Engineer, 06/2004 - 01/2005• Designed a new dispensing machine.• Rework the design and configuration of our most (single shot dispensing machine).• Help design engineering team transition from 2D to 3D drawings using Solidworks design package software. Tegal Corporation, Petaluma, CAMechanical Engineer, 01/2001 - 08/2001• Re-configured system design to accommodate newer parts and components.• Used Co-Create 3D CoCreate Solid Designer to check for interferences, accessibility and control.• Designed test fixtures for high vacuum plasma deposition chamber.• Helped with system design and reconfiguration to meet customer specifications. Ross Cook, San Jose, CAMechanical Engineer, 09/1999 - 11/2000• Developed design concepts in vacuum systems.• Performed analysis and calculations prior to design of particular pump or compressor.• Converted and organized 2D drawing into 3D CAD models using SolidWorks.• Used FEA (COSMOS) software to predict the vibration of compressor shaft at different loads. • Tested units according with ASME standards.Turner Design Corporation, Sunnyvale, CAAssociate Mechanical Engineer, 03/1998 - 09/1999• Presented alternative designs to engineering staff and clients, establishing acceptance of new methods and standards.• Performed design, drafting of components using SolidWorks 3D CAD software to create assembly drawings, and 2D drawings.• Implemented ECO/BOMs.United State Navy Reserve, Santa Clara, CAAircraft Maintenance Technician, 10/1993 - 10/1998• Maintained C130 transport planes.• Aided a team of ground support of A6 intruders at Top Gun Miramar, San Diego.• Participated in two missions: Sigonela, Italy and Atsugi, Japan. ADDITIONAL SKILLS• Computer Skills: SolidWorks, CoCreate Solid Designer, AutoCAD 2000, C++, HTML, Microsoft Office, AS/400• Languages: Fluent in Arabic/French/English LICENSES AND CERTIFICATIONS• Airframe & Power plant (A&P) tech - Sierra Academy PROFESSIONAL AFFILIATIONS• Member - American Society of Mechanical Engineers (ASME)

I have work on engine peripheral system and engine components, large assembly. Marine engine in man diesel turbo India. Modeling and drafting of diesel engine parts. l Mainly work on Unigraphics, s... Read more

I have work on engine peripheral system and engine components, large assembly. Marine engine in man diesel turbo India. Modeling and drafting of diesel engine parts. l Mainly work on Unigraphics, solidworks 3d software. 2D to 3D conversion of engine part. Part family.large assembly

Mechanical engineer with solid expertise in the conceptualization, creation & development of innovative mechanical design. Experienced in the areas of machinery Design such as Aluminium Furnace. Ingot... Read more

Mechanical engineer with solid expertise in the conceptualization, creation & development of innovative mechanical design. Experienced in the areas of machinery Design such as Aluminium Furnace. Ingot casting machine . colling chamber Filtration System . rotey furnace sheet metal component,. Proven ability to apply general principles of mathematics and engineering to provide technically feasible solution. I am a experienced design engineers providing end-to-end solutions in areas of CAD (Computer Aided Design). I am a single window interface for all CAD services with quick turnarounds including 3d modeling, 2d drafting, CAD conversions, reverse engineering etc. I can provide a full range of services that addresses your every need for CAD. No matter what your problem, or how complex design needs, More I am an certified invetor Professional

I've been a Civil engineering and Architectural designer of SM supermalls at Philippines. My expertise is about Building design, Structural design, 3D modeling and Rendering services using different e... Read more

I've been a Civil engineering and Architectural designer of SM supermalls at Philippines. My expertise is about Building design, Structural design, 3D modeling and Rendering services using different engineering and design softwares such as follows : Autocad Sketchup 3D modeling software Vray Rendering plug-ins ETABS structural analysis Epanet Water system With the following specialties in design and planning preparation: - Architectural plans - Interior Design - Structural plans - Structural Analysis - Sanitary/Plumbing plans - Electrical Plans - Mechanical Plans - fire protection - HVAC design - LPG Design - Bill of materials and specifications preparation I am a Building and Design Officer of SM Supermalls for almost 5 years. The responsibilities involves the handling mall constructions and operations, engineering & design operations, planning & budgeting, business leadership and experience overseeing engineering/maintenance teams in developing, testing, and remedying technical engineering problems, as well as my superior project management and team leadership abilities. I also mastered the following Engineering and design softwares which may be useful for the benefit of your office as follows: Auto-Cad, Staad, E-tabs, 3D Max ,Architectural software,3D Illustrator, Sketch-up,V-ray Render, Autodesk sketchbook, Surfer10 surveying software, Epanet Water System, Cyber link Power Director, MS Project, Microsoft Math, Mathlab, Microsoft Word, Excel, PowerPoint and Animated Presentations.