I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine... Read more

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months of experience in automation systems, in which my main focus was on 3D interface systems. I thoroughly enjoy working on projects that require me to stretch and expand my skills to new limits. I am always looking for a way to continue growing the knowledge in my field and gaining new skills.

I am an Electric and Electronic Engineer with experience in 3D printing and plasma cutting. I do part-time designs for 3D printing and plasma/laser cutting. I have a good work ethic, am detail... Read more

I am an Electric and Electronic Engineer with experience in 3D printing and plasma cutting. I do part-time designs for 3D printing and plasma/laser cutting. I have a good work ethic, am detail oriented and work well under pressure. I am passionate about the work that I do and look forward to expanding my knowledge and experience in the field.

I am a CAD enthusiast that loves a good CAD challenge. I especially love mechanical design, not natural stuff. I am also big into prototyping and 3D printing. I love Arduino, and the proud owner of... Read more

I am a CAD enthusiast that loves a good CAD challenge. I especially love mechanical design, not natural stuff. I am also big into prototyping and 3D printing. I love Arduino, and the proud owner of Creari.

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing... Read more

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory owner looking to improve your production systems and manufacturing methods, I can help you. Having a great deal of first-hand experience operating machine tools allows me to fully embrace the principles design for manufacturing and assembly resulting in practical and cost-effective designs. I am passionate and proud to be a Mechanical Engineer with extensive knowledge of engineering principles, theories, specifications and standards. My goal is to employ sound engineering, design and management principles to allow South African companies to become competitive and recognized in the global marketplace. This is not merely a platitude, but a sincere desire to foster a culture within companies to develop and maintain a World Class Standard of excellence. The services I can offer include: • Product conceptualization and industrialization (from an idea to reality) including design reviews and failure modes and effects analysis (FMEA). • 2D and 3D computer aided design (CAD). • 3D rendering and animation. • Design calculations and finite element analysis (FEA). • Access 3D printing and machine shop for prototyping and production. • CNC Lathe and Mill Programming (depending on machine controller). • Manufacturing process and efficiency improvements. • Business process improvement. • Production workflow and routing including datapacks for each production stage detailing methods and Inspection requirements. So, if it is a simple 2d drawing you require, a full product industrialization service or you are looking to improve your manufacturing systems and/or business processes, reach out and contact me.

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and... Read more

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and become a fully integrated partner in your development project. Project Engineering Our involvement is entirely centered around the clients requirements. We are able to handle the product from start to finish Reverse Engineering Reverse engineering is taking apart an object to see how it works in order to duplicate or enhance the object. One type of reverse engineering involves producing 3-D images of manufactured parts when a blueprint is not available in order to re-manufacture the part. Re-Engineering Re-engineering of the existing engineered components and systems. Modifications of the existing design are done in order to enhance the look & feel, improve material usage and productivity.

I am mechanical engineer from Cape Town, South Africa. After 10 years in various engineering sectors which included, machine design, mold design, agricultural machinery design,aluminium road... Read more

I am mechanical engineer from Cape Town, South Africa. After 10 years in various engineering sectors which included, machine design, mold design, agricultural machinery design,aluminium road tanker design and manufacturing, I find myself working as a design engineer in the marine/boat building industry. Projects I have worked on ranges from patrol boats (8.5m to 35m), vessels for the Navy to glass-fibre passenger ferries for river transport in Africa. I strive for clean simple designs that work effectively and simplistically.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing. Read more

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

CAD Designer primarily in the Jewellery industry. Proficient in: Rhino Keyshot Read more

CAD Designer primarily in the Jewellery industry. Proficient in: Rhino Keyshot

3D Modeling Design and 3D Printing Mechanical engineering undergraduate (2010 - 2014) and Entrepreneurship postgraduate (2015). Read more

3D Modeling Design and 3D Printing Mechanical engineering undergraduate (2010 - 2014) and Entrepreneurship postgraduate (2015).

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled... Read more

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3D CAD (Autodesk Inventor and Autodesk Fusion 360) and am proficient in working from and producing 2D AutoCAD drawings. I also have experience in rendering and simple animations of both the finished boat or custom stand-alone components and systems. My previous structural projects have included a full 3D model, drawing pack and nested cut files for a 15m ocean research catamaran. As well as numerous custom components where an off-the-shelf option was not suitable. While I am not a naval architect, I have partnered with a company that can provide all the necessary structural calculations. Plug and mould design for GRP boats is another area I particularly enjoy, and have extensive experience in. In addition to design, I am highly skilled at the communication and collaboration of all aspects of the design process. This has been aided by cloud-based CAD software such as Fusion 360, which facilitates the sharing of information and keeping track of design changes in real time. In addition to standard boat design work I particularly enjoy smaller custom R&D projects that require more creative solutions within a given set of parameters. My approach to design is one of simplification, and always working within the limitations of the project with regard to materials and fabrication techniques. The ideal design is usually the simplest solution that can satisfy all criteria.

Im 20 years old.Im currently a student at Academy IDT studying multifunctional draughting.I use Autodesk software (Solidworks,Autocad,Revit). I would say out of personal experience that Im good at... Read more

Im 20 years old.Im currently a student at Academy IDT studying multifunctional draughting.I use Autodesk software (Solidworks,Autocad,Revit). I would say out of personal experience that Im good at civil draughting,Architectural draughting and also 3D modeling.I have a great passion for Architecture since highschool thats why I have decided to start freelancing to build my portfolio.I also love designing andI love working with people.With this skill set I think that I'll be your perfect candidate for the job.Im fast,accurate and never miss a deadline.

Read more

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an... Read more

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an approach in hand drawn sketching and illustration skills. I’m very experienced with CAD programs such as Revit Architecture, Sketch-up, Zbrush, Substance Painter & Designer, Megascane, Solidworks, 3ds Max, Keyshot & Vray

Have been in the Steel construction industry for 5 years and always had the curiosity to design in 3D, thats when I discovered I actually have a talent to come up with solutions to mechanical... Read more

Have been in the Steel construction industry for 5 years and always had the curiosity to design in 3D, thats when I discovered I actually have a talent to come up with solutions to mechanical problems. The 3D software has just made it easier to calculate sizes and spaces. Give me your work and you can be sure to have your work done by a pro. I work with Autodesk Revit, Inventor, Solidworks, Autocad, Advanced Steel and Autodesk Plant.(All Autodesk Software)

Hello, my name is Lucas and I am a young professional working at the University of Cape Town for the mechanical engineering department. My current position is mainly based on research projects... Read more

Hello, my name is Lucas and I am a young professional working at the University of Cape Town for the mechanical engineering department. My current position is mainly based on research projects regarding new production technologies. The main focus hereby is on theoretical analyses by using Ansys as a simulation tool. Since I am new and therefore couldn´t prove​ myself yet, I attached some of the projects I was doing the last years. Furthermore, I gained a lot of experiences in multicultural work environments during my studies in Germany, Denmark, and South Korea. During my 1,5 years at Robert Bosch GmbH in Stuttgart, I was working for the design and development department. Our branch was focused on new technologies for the food industry and packagings for the pharma industry. Summarised my main skills are: 1.) Ansys simulations 2.) Solidworks design 3.) Product development 4.) CAD/CAM 5.) Maths around mechanical Engineering If you have any questions regarding my skills don´t hesitate to ask. Lucas Lobmeyer

I am a well rounded individual, that finishes given work in the shortest time possible. With extreme attention to detail and accuracy I work well alone aswell as in a team. I worked my way up... Read more

I am a well rounded individual, that finishes given work in the shortest time possible. With extreme attention to detail and accuracy I work well alone aswell as in a team. I worked my way up fairly fast from single component drawings for a sheet metal fabrication company, to heading up my own projects always ensuring my projects are done in time.

As a freelance 3D modeller, I have worked independently on many design projects including jewellery, furniture, prosthetics, and motorcycle parts, creating production-ready 3D models, final renders,... Read more

As a freelance 3D modeller, I have worked independently on many design projects including jewellery, furniture, prosthetics, and motorcycle parts, creating production-ready 3D models, final renders, dimensioned layouts, and reports or explainer documents for manufacturing. My many years of experience in silversmithing have given me a thorough understanding of small-scale metal work. My scientific and mathematical background have led me to favour parametric and algorithmic design tools (specifically Grasshopper), which allow me to create complex organic patterns and forms. I am a fast learner and excellent problem-solver, with a strong design sense and wide range of interests. I also tutor students in how to use these tools

1. Mechanical Machine Design and detailing 2. Material Selection and Heat Treatment 3. Bulk Material Handeling system design Read more

1. Mechanical Machine Design and detailing 2. Material Selection and Heat Treatment 3. Bulk Material Handeling system design

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting. Read more

AutoCAD drafting and design with Inventor drafting and design. I have much experience in mechanical engineering and design with general drafting.

I have been designing jewellery using CAD software for the past 10 years. I have worked on bespoke and mass production projects using 3D printers. My experience has taught me the casting and... Read more

I have been designing jewellery using CAD software for the past 10 years. I have worked on bespoke and mass production projects using 3D printers. My experience has taught me the casting and manufacture process of various types of jewellery. I use, Rhinoceros, Magics, Matrix, Keyshot and Vray for producing 3D models and photo-realistic renderings. Please contact me for more details