aleksandarmilosavljevic

Other experience

• General Engineering Consultancy Works – Al Kheesa (Rawdat Hamama District) Year: 2012
  Location: Doha, Qatar
  Company: GeoGIS Consultants
  Position: Project Assistant
  
  Description:
  The project involved topographic surveying to support the final phase of road and infrastructure design in the Al Kheesa area, covering 1,580 ha. High-precision geodetic plans were created, detailing existing structures, elevation points, road networks, underground utilities, and other essential urban planning elements. The digital maps were developed at a 1:500 scale.
• General Engineering Consultancy Works – Zone 30/31 Year: 2012
  Location: Doha, Qatar
  Company: GeoGIS Consultants
  Position: Project Assistant
  
  Description:
  The project involved topographic surveying and underground utilities detection over an area of 650 ha. The main objective was to develop 3D digital maps at a 1:500 scale to support infrastructure works and urban planning.
• Laser Scanning of the Danube Shore – Vinci-Kostolac-Dubravica Year: 2013
  Location: Serbia
  Company: GeoGIS Consultants
  Position: Project Assistant
  
  Description:
  Surveying and data processing for the creation of a detailed digital terrain model (DTM) along 60 km of the Danube shoreline. Based on the refined point cloud, cross-sections, contour lines, breaklines, and terrain contours were generated. Digital maps were produced at a 1:1000 scale.
• DN103: Roads and Infrastructure – Umm Slal Ali, Umm Ebairiya, South Umm Al Amad, North Bu Fesseela Year: 2013
  Location: Doha, Qatar
  Company: GeoGIS Consultants
  Position: Project Assistant
  
  Description:
  The project involved establishing temporary benchmarks, GPS leveling, detailed topographic surveying, and underground utility detection over an area of 808 ha. 3D digital models at a 1:500 scale were created, and the results were presented through geotagged video recordings integrated into ArcReader.
• DN107: Roads and Infrastructure – Al Froosh / Al Kharaitiyat Year: 2013
  Location: Doha, Qatar
  Company: GeoGIS Consultants
  Position: Project Assistant
  
  Description:
  The project involved topographic surveying and mapping of a 250 ha quarry within a total area of 400 ha. A mobile laser scanner was used to generate accurate 3D digital maps at a 1:500 scale.
• Porto Novi Project – Marine Research, Phase 2A Year: 2013-2014
  Location: Kumbor, Montenegro
  Company: GeoGIS Consultants
  Position: Lead Engineer
  
  Description:
  Installation of meteorological stations, tide gauges, and digital wave meters to collect data on temperature, atmospheric pressure, wind speed and direction, wave height, and other parameters. The data system operated in NMEA 0183 format, and data processing was performed using Matlab scripts.
• GIS Database for the Real Estate Market in Serbia Year: 2015
  Location: Serbia
  Company: GeoGIS Consultants
  Position: Project Assistant
  
  Description:
  Development of a basic GIS geodatabase with processed data from official government institutions and field-collected information. The GIS model was developed in an ArcGIS and RDBMS environment to support real estate market analysis.
• GIS Database of Urban Zones in Belgrade Year: 2016
  Location: Serbia
  Company: GeoGIS Consultants
  Position: Lead Engineer
  
  Description:
  Development of a detailed geoinformation database for urban zones in Belgrade. The project involved processing data from various sources and integrating it into a GIS system to enhance urban planning and city management.
• Vectorization of Future Oil Pipeline – Red Sea Project Year: 2024
  Location: Saudi Arabia
  Company: Geotaur
  Position: Project Manager
  
  Description:
  The oil pipeline corridor project is a major infrastructure initiative aimed at facilitating crude oil transportation along a strategically important route on the Red Sea coast.
  
  Spanning 1,140.8 km, the project required the creation of high-precision topographic base maps and longitudinal profiles to support the planning and development of the pipeline.
• Petroleum Products Corridor Qassim–Jawf Year: 2024
  Location: Saudi Arabia
  Company: Geotaur
  Position: Project Manager
  
  Description:
  The project involved vectorization of the pipeline route, including analysis and digitization of terrain features, infrastructure, and surroundings along the 640 km corridor covering an area of 25,600 ha.
  
  High-resolution geospatial data was utilized for precise mapping and support in the planning and design of the future pipeline.
• University of Lorraine in Nancy – BIM Model and Technical Documentation Year: 2022
  Location: France
  Company: Geotaur
  Position: Project Manager
  
  Description:
  The project focused on preparing 3D and 2D documentation for several buildings within the university complex, with a total net area of approximately 30,000 m².
  
  The primary objective was to facilitate planning and execution of building reconstruction through detailed BIM modeling and documentation.
• Tonkin Highway – Reconstruction and Geodetic Support Year: 2019
  Location: Australia
  Company: Geotaur
  Position: Project Manager
  
  Description:
  Geotaur was engaged in processing data collected by the client using the Trimble MX8 mobile mapping system.
  
  Our tasks included:
  
  Point cloud classification
  Creation of a digital terrain model
  Development of a topographic plan, which served as the basis for highway reconstruction planning and execution
• Belgrade – Bar Railway – Geodetic Support for Reconstruction Year: 2021-2022
  Location: Serbia
  Company: Geotaur
  Position: Project Manager
  
  Description:
  Geotaur was responsible for creating a detailed topographic plan and 3D models of the terrain, bridges, tunnels, and culverts, essential for planning the railway reconstruction.
  
  The work included processing and analyzing data obtained from two sources:
  
  Aerial LiDAR system (Riegl VUX 1 UAV) for large-scale terrain mapping
  LiDAR system mounted on a rail cart for detailed data collection along the railway route
  Our role included:
  
  Extracting all necessary data from georeferenced point clouds
  Producing topographic drawings and technical documentation in compliance with client requirements and Serbian regulations
  Generating longitudinal and cross-sections for tunnels at every 10 meters
  Creating high-precision 3D models of bridges, tunnels, and terrain
• Elixir Eco Energy – Industrial Complex Year: 2024
  Location: Prahovo, Serbia
  Company: Geotaur
  Position: Project Manager
  
  Description:
  Geotaur was engaged in marking and monitoring the construction of 14 industrial buildings with high columns and complex details, as well as 2 administrative buildings.
  
  Our role included the following activities:
  
  Precise staking of key points for structures and infrastructure
  Monitoring the assembly of steel structures and concrete elements, including columns and beams
  Controlling the geometry of high and complex structures
  Preparing technical documentation, including topographic plans and 3D models
• "Kula Beograd" – Belgrade Waterfront, Surveying Work on the Tower Construction Year: 2021
  Location: Serbia
  Company: Geotaur
  Position: Project Manager
  
  Description:
  Geotaur undertook surveying work on the project from the 30th to the 41st floor, providing support at all stages of construction until the building's completion in May 2021. Our task was to ensure precision and efficiency while addressing the complex challenges required by this project.
• NEOM Spine – Topographic Mapping Year: 2023
  Location: Saudi Arabia
  Company: Geotaur
  Position: Project Manager
  
  Project Description:
  As part of the ambitious NEOM megaproject in northwest Saudi Arabia, Geotaur was entrusted with high-precision topographic mapping to support infrastructure planning and design for the NEOM Spine corridor.
  
  The project covered an extensive area of 1,541.47 km², spanning coastal, desert, mountainous, and urban regions.
  The primary objective was vectorization of terrain features and the creation of a comprehensive topographic dataset based on high-resolution aerial photogrammetry data.
• BMW FMDC – Geodetic Network for Factory and Test Track Year: 2024
  Location: Czech Republic
  Company: Geotaur
  Position: Project Manager
  
  Project Description:
  The construction of the BMW FMDC factory and test track in Sokolov is a prime example of delivering high-quality geodetic support for large-scale projects where accuracy and precision are of fundamental importance.
  
  Geotaur’s surveying team provided reliable results through expertise, the use of state-of-the-art equipment, and innovative data processing methods.
  The project’s outcomes established a solid foundation for the further development of one of the most significant automotive infrastructure facilities in the region.