Hire the best freelance Plastic Engineering expert designers for your company

I grew up in the rapid prototype/plastic injection molding industry as my father had a successful small business. I was sweeping floors at 7 years old and worked all aspects of the industry including;... Read more

I grew up in the rapid prototype/plastic injection molding industry as my father had a successful small business. I was sweeping floors at 7 years old and worked all aspects of the industry including; finishing molds by hand (spot & bench), as a machinist/moldmaker, and finally to design & engineering. It is also a passion of mine to automate processes by writing custom software to enhance existing programs to be tailored for company's needs.

Senior Design Engineer in MNC Advanced skills in product design. Proficient in surfacing, Solid, and plastics. Read more

Senior Design Engineer in MNC Advanced skills in product design. Proficient in surfacing, Solid, and plastics.

I am a CAD Designer with more than 5 years of work experience. My design work consists of concept designing, product designing, rendering, reverse engineering, prototyping, mold designing and product... Read more

I am a CAD Designer with more than 5 years of work experience. My design work consists of concept designing, product designing, rendering, reverse engineering, prototyping, mold designing and product manufacturing. I have partnered with molders and manufacturers to provide complete product manufacturing solutions.

Product Engineer with more than 10 years of experience in product development in Automotive and Heavy machinary field. Expert in Catia V5. My Services (Technical): -3D modeling & manufacturing drawin... Read more

Product Engineer with more than 10 years of experience in product development in Automotive and Heavy machinary field. Expert in Catia V5. My Services (Technical): -3D modeling & manufacturing drawing -Design of Automotive Plastic parts -structural design -wiring harness routing and packaging -lumbar system pneumatic tube routing packaging -Concept development -Design refinement -Rendering

I'm a mechanical engineer graduate from Budapest University of Technology with high honors. I work as a development engineer and 3D modeler/technical drawer at a Hungarian Company called ICO Zrt. My... Read more

I'm a mechanical engineer graduate from Budapest University of Technology with high honors. I work as a development engineer and 3D modeler/technical drawer at a Hungarian Company called ICO Zrt. My job is four-fold: making adjustments to injection molds by redesigning them, designing plastic parts ready for injection molding or 3D printing (SolidWorks), carrying out injection molding simulations in Moldflow, designing injection molds from the get go. Recently I picked up basic to intermediary knowledge in robot programming and handling system designing.

Self-motivated Engineer with over two years of experience in machine shop practices, Capable to manufacture precise parts and plastic injection molds. Qualified in CNC programming and mechanical desig... Read more

Self-motivated Engineer with over two years of experience in machine shop practices, Capable to manufacture precise parts and plastic injection molds. Qualified in CNC programming and mechanical designing with extensive knowledge of blueprints and equipment diagnostics, Works independently to troubleshoot and resolve machining operations, tools and program issues.

Automotive product developement CATIA CAD expert Prototyping out of the box mindset concept developement GD&T Read more

Automotive product developement CATIA CAD expert Prototyping out of the box mindset concept developement GD&T

I believe in my knowledge. I will guarantee 100% client satisfaction, experience has made me accuracy and speed oriented person in mechanical design services domain. Read more

I believe in my knowledge. I will guarantee 100% client satisfaction, experience has made me accuracy and speed oriented person in mechanical design services domain.

3D modelling, Design for Manufacturing Micro and Nano-manufacturing and modelling Polymer modelling Design of Tricone Drilling Bits Medical Devices Read more

3D modelling, Design for Manufacturing Micro and Nano-manufacturing and modelling Polymer modelling Design of Tricone Drilling Bits Medical Devices

I've been working in automotive field for almost 12 years, especially as design engineer. mostly i'm designing plastic parts such as bumpers, grille, garnish and other plastic components. Sometimes al... Read more

I've been working in automotive field for almost 12 years, especially as design engineer. mostly i'm designing plastic parts such as bumpers, grille, garnish and other plastic components. Sometimes also doing stamping parts and recently casting parts such as alloy wheel.hopefully my criterion meets your requirements.

Cad communals is an organization where all CAD & CAE works are done here. we are a team of 10 people. we have experienced more than 6+ years in each domain like Cad and Cae. each and every project we... Read more

Cad communals is an organization where all CAD & CAE works are done here. we are a team of 10 people. we have experienced more than 6+ years in each domain like Cad and Cae. each and every project we deal is much important and 100 % work satisfaction and all cad and analysis works are done in cadcommunals. open to any sort of CAD and CAE works.

I provide project and product consulting for a wide range of products for manufacturers and individuals throughout the United States. I specialize in 3D solid modeling and 2D CAD design. I can hel... Read more

I provide project and product consulting for a wide range of products for manufacturers and individuals throughout the United States. I specialize in 3D solid modeling and 2D CAD design. I can help you determine if your concept is viable for production and guide you through the manufacturing process. MC3D LLC specializes in CAD design and development services. Skilled in 3D modeling and 2D document technical specifications for product manufacturing. Learn more about my CAD design services through my website (http://www.mc3dllc.com/)

I am a mechanical engineer currently working as a Design Engineer in the field of Plastic product and mold designing for injection molding. I am having design experience of 5 years and in this filed o... Read more

I am a mechanical engineer currently working as a Design Engineer in the field of Plastic product and mold designing for injection molding. I am having design experience of 5 years and in this filed of plastics, i have experience of 2years. I have the software knowledge of Solidworks, Pro E, CATIA, AutoCAD, ANSYS and MasterCAM. I am currently using solidworks for designing.

Machine Designer: I'm a machine designer having graduation in Mechanical Engineering and post graduation in Plastic Engineering with 7 years experience in Machine Design and Project management in Mach... Read more

Machine Designer: I'm a machine designer having graduation in Mechanical Engineering and post graduation in Plastic Engineering with 7 years experience in Machine Design and Project management in Machine Development. I have recently worked in InspirOn Engineering involving Textile Machinery as a Dy. Manager in Project Development, where my responsibilities included Design the machine, Manufacturing and testing of Machine. My responsibility also included cost management and customer satisfaction. My experience creating customize machines in different segment segments like Textile, Plastic, Investment casting & Automation Projects including Concept generation,Design Calcualtion,3 D Modelling, Drawing Inspection,DFA,DFM Maintence, Safety, Costing, Ergonomics, Aesthetic & Geometrical Dimension & Tolerances. I have consistently delivered projects on time and under budget, which has earned me the role of Project Leader in my Last Company. I believe my skills would be ideal for your project.

Hii, I am an mechanical engineering graduate & have knowledge of plastic component design with catia v5 . Meshing software Hypermesh -Dual mesh ,Mid plan mesh or shell mesh & 3D Mesh. . Moldflow... Read more

Hii, I am an mechanical engineering graduate & have knowledge of plastic component design with catia v5 . Meshing software Hypermesh -Dual mesh ,Mid plan mesh or shell mesh & 3D Mesh. . Moldflow or Plastic flow analysis etc . Feed system design ,cooling channel design , Part balancing Fill +Pack Analysis , Cool+Fill+Pack+Warp Analysis , Cool FEM Analysis, Over Molding Analysis,Insert Molding , Warpage

I have a rich experience in designing high quality plastic parts (including 3D prints), due to my 3 years of experience in designing luxury automotive interiors for exclusive clients like Porsche, Mas... Read more

I have a rich experience in designing high quality plastic parts (including 3D prints), due to my 3 years of experience in designing luxury automotive interiors for exclusive clients like Porsche, Maserati, BMW, Land Rover and many more through a big German company. Besides this I also have experience in designing active parts for Ambient lighting for automotive interiors, including simulations. My skills in CATIA V5 and above is certified by official Dassault Systems training at an Expert level. More than anything, I deliver quality!

Stephen J. Cole Results Driven Engineering Professional with a knack for bringing derailed projects back into focus and resurrecting dormant projects to produce profitable product through careful a... Read more

Stephen J. Cole Results Driven Engineering Professional with a knack for bringing derailed projects back into focus and resurrecting dormant projects to produce profitable product through careful analysis and strategic implementation. Consistently successful in increasing profitability and quality through simplification where feasible, by utilizing the most current technology available and by improvising where traditional methods fall short of achieving the set goal. An uncompromising commitment to product quality and integrity while streamlining the design process through the utilization of solid modeling for design, FEA for performance prediction and rapid prototyping for design substantiation, resulting in high grade products and systems produced well within predetermined margins. Well versed in empirical testing of pre-production products and advanced testing of systems prior to system ATP (Acceptance Test Procedure) to further ensure the final design meets and exceeds performance expectations.

I am manoj kumar das from Odisha ,india. i have complete B-Tech in mechanical engineering from Univercity of mumbai & Complete Master programming in CAD/CAM from Central institue of plastic engineerin... Read more

I am manoj kumar das from Odisha ,india. i have complete B-Tech in mechanical engineering from Univercity of mumbai & Complete Master programming in CAD/CAM from Central institue of plastic engineering & technology (CIPET). i have 6 years of vast exprience of Design & Devlopment of Verious OEM & tear one Automotive supplier like,RENAULT,HUNDAI,KIA,PININFERINA.my best skill is CATIA V5,UG NX,powerpoing,knwoladge about PLM Drawing reading skill,GD&T,Product design,Product Devlopment,Parametric modeling,Drafting etc

Hello, My name is Abhijatya,I am from New Delhi India,I am having over 8 years of experience in Mechanical engineering.I have expertise in Solidworks,Catia V5,Creo,Keyshot 5,3DS max,Ansys etc. I work... Read more

Hello, My name is Abhijatya,I am from New Delhi India,I am having over 8 years of experience in Mechanical engineering.I have expertise in Solidworks,Catia V5,Creo,Keyshot 5,3DS max,Ansys etc. I work in a manufacturing industry so I am having a great knowledge in the field of manufacturing.As a designer,I look all the aspects of manufacturing(DFM) and Assembly(DFA). Along with this I am expert in graphic design.Adobe illustrator and Photoshop is my strength.

I have over 7 years experience in using CAD software's like Solid works and Auto Cad. I am currently working as Mechanical Design Engineer for an established organization using various design tools an... Read more

I have over 7 years experience in using CAD software's like Solid works and Auto Cad. I am currently working as Mechanical Design Engineer for an established organization using various design tools and applying mechanical engineering principles. Good at sheet metal works. My interest is to support customers developing best Mechanical solutions.

I am an experienced and creative hand-on engineering consultant who can communicate ideas clearly to my clients. My experience and skill sets covers a broad range of services and industries. I work fr... Read more

I am an experienced and creative hand-on engineering consultant who can communicate ideas clearly to my clients. My experience and skill sets covers a broad range of services and industries. I work from napkin sketches and ideas to prototypes and through production and distribution, I can provide manufacture-able real-world solutions. I will help you. I'm an inventor and entrepreneur at heart and passionate for all things technical, especially tangible things. My desire to create and understand how and why lead to me obtaining a degree in Mechanical Engineering studying mechanical systems and manufacturing. With this core skill set, I am constantly inventing, creating, and building new things finding success with each project. Working as a freelancer has given me the ability to work without the chains of a corporate environment and work in a way the flows much easier my clients and myself. My services include: product development, product and machine design, material selection, process selection, process design and management, mass production, tooling and fixture design, CNC programming, patent assistance, scripting, automation, micro-controllers, rapid prototyping, 3D and 2D Models, drafting, engineering design, stress testing, FEA Finite Element Analysis, web development, welding, Quality Control, industrial engineering, manufacturing, FileMaker and database development, graphics, catia, solidworks, autocad, rhino, CAM, CAE, DFM, DFA, and rendering.

Mechanical and Plastic engineer. Solidworks expert more then 20 years of experiance   Read more

Mechanical and Plastic engineer. Solidworks expert more then 20 years of experiance  

3D'd is a company of designers with backgrounds in mechanical and plastic engineering that include professional work experiences in manufacturing and fabrication! We offer the personal touch of a sm... Read more

3D'd is a company of designers with backgrounds in mechanical and plastic engineering that include professional work experiences in manufacturing and fabrication! We offer the personal touch of a small company for projects big and small, so please contact us for any questions and check out our website from time to time as we are updating with pictures of our our designs! Thank you and we look forward to bringing your ideas to life!

Currently pursuing PhD in machines design for textile manufacturing. Topic of research : Design of linear actuator for traversing of yarn in a winding machine. Read more

Currently pursuing PhD in machines design for textile manufacturing. Topic of research : Design of linear actuator for traversing of yarn in a winding machine.

10+ Years of experience as CAD designer. 10+ Years of experience as engineer in the automotive sector Specialised in plastic components Read more

10+ Years of experience as CAD designer. 10+ Years of experience as engineer in the automotive sector Specialised in plastic components

Mechanical Design Engineer February 2011 – present “SMT” D.O.O., Bar, Montenegro • Organization of design units. • Product design projects for a companies from Europe, US, Canada, … Elaboration o... Read more

Mechanical Design Engineer February 2011 – present “SMT” D.O.O., Bar, Montenegro • Organization of design units. • Product design projects for a companies from Europe, US, Canada, … Elaboration of the appearance, the design of parts and assemblies (design of plastic parts, the development of sheet metal parts ...), technological examination of projects, the tool design, the launch of mass production. (more than 70 projects for five years). • Technological design projects for a companies from Europe, US, Canada, … • Tool design (molds, dies, die casting molds). Senior Mechanical Engineer March 2010 – January 2011 “LG Electronics - RUS” ltd., Moscow, Russia • Organization repair of tool on the basis of a branch in Russia. Reduced the cost of repair tool is almost 3 times (from $ 2 million per month to $ 700 thousand per month). • Organization of a warehouse of spare parts for repair of molds and dies. Time repairs and maintenance have been reduced by 50%. • Participation in the R & D department. Technological challenges in developing new products. • Mold and tool design. Design of molds for new projects. Modernization of molds and dies. • The launch of new products in mass production (of 4 new products, more than 90 molds and dies tested and put into operation). • Work with suppliers of components (21 supplier in Russia and Korea). Carrying out repair and commissioning. Senior Mechanical Engineer July 2008 – March 2010 “Nordic Aluminium Russia” ltd., Moscow, Russia ( “Nordic Aluminium” (Finland)) • Participation in projects of the parent company. Development of architectural systems in high-rise construction. • Design windows - doors group of products • Organization of production of products in the territory of the branch. The cost of the products were reduce production by 25% - 30%. Which resulted to an increase in sales more than 2 times. Mechanical Design Engineer; Programmer of CNC equipment May 2004 – July 2008 “Door Han” ltd., Moscow, Russia • Development of new systems of automatic garage doors and shutters. Developed a new system of gate opening and spring charging. • Design details of polymers, aluminum and sheet metal. • Mold and tool design. Design of molds for new projects. Modernization of molds and dies. • Organization department molding and extrusion of polymeric materials. Will fully meet enterprise products from polymers. Cost of sales decreased by approximately 15% - 20%. • Organization of toolmakers department. The department provided a completely necessary tool for company (molds, dies, molds for casting aluminum extrusion dies, etc.). After the launch, toolmakers department on 90% ensured the factory an essential tool. • Development of technologies for the manufacture of parts for tool room. Writing programs for CNC equipment. • Launch area for the production of prototype products. Possible to reduce the number of errors in the final product and reduce the startup time in the series.

I am offering design assistance services in mechanical design for last 25 years. Please see my work on http://www.box.net/mechdesign , http://mechanicaldesignsoftware.blogspot.in/ . I work on site (... Read more

I am offering design assistance services in mechanical design for last 25 years. Please see my work on http://www.box.net/mechdesign , http://mechanicaldesignsoftware.blogspot.in/ . I work on site (if required and at extra cost) to give best result with minimum time. I have completed many designing assignment and 2d to 3d drawing conversion projects. I have good speed and also offer English Writing. I have developed mechanical calculation excel worksheet using VBA.