Hire the best freelance Mechanical CAD Drafting expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following service... Read more

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following services design 3D models 3D rendering with high quality image 3D assemblies 3D animations 3D printing with checked stl files on shapeways simulations Make 2D drawings sheet metal working ,weldments i will be using soildworks visualize,photoview 360 and keyshot program for rendering Offers: unlimited revisions Quality work within the specified time frame

I am proficient in CAD modeling using Solidworks, autocad, creo, catia,nx and rendering can also be made. I have experience in 3D Mechanical design Read more

I am proficient in CAD modeling using Solidworks, autocad, creo, catia,nx and rendering can also be made. I have experience in 3D Mechanical design

I am engineering designer. graduated as bachelor engineering majoring Mechanical Engineering. I Ussually use AutoCad and Solidworks as sofware engineering Read more

I am engineering designer. graduated as bachelor engineering majoring Mechanical Engineering. I Ussually use AutoCad and Solidworks as sofware engineering

Budget and timing will be my key specialties. I am a Mechanical Engineer with strong passion for computer-aided design and product development. More than 3 years of CAD design experience in India and... Read more

Budget and timing will be my key specialties. I am a Mechanical Engineer with strong passion for computer-aided design and product development. More than 3 years of CAD design experience in India and UAE. Currently looking for freelance design projects.

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Ma... Read more

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Material Selection & Load Calculation on Structural Beam. • Mechanical Engineer working on Basic (conceptual) and detailed engineering designs for sectors like power plant, process plant and waste water treatment plant. • Mechanical Design Engineer who have worked on different projects & handled a challenging technical development position on Precision Sheet Metal Enclosure Designing using Solid Works and AutoCAD.

As an accomplished Mechanical Engineer with a wealth of experience in the field and a mastery of SOLIDWORKS design software, I have consistently demonstrated my ability to contribute to projects with... Read more

As an accomplished Mechanical Engineer with a wealth of experience in the field and a mastery of SOLIDWORKS design software, I have consistently demonstrated my ability to contribute to projects with innovative solutions, meticulous attention to detail, and a deep understanding of engineering principles. Throughout my career, I have leveraged my SOLIDWORKS proficiency to enhance product development, streamline manufacturing processes, and bring designs from concept to reality. Key Skills and Expertise: SOLIDWORKS Proficiency: With years of hands-on experience, I possess an in-depth understanding of SOLIDWORKS, utilizing its various modules and features to create intricate 3D models, assemblies, and detailed drawings. My ability to efficiently navigate the software empowers me to design complex geometries, ensuring optimal fit, form, and function. Design Optimization: I am skilled in employing SOLIDWORKS simulation tools to analyze and optimize designs for structural integrity, thermal performance, and fluid dynamics. This expertise enables me to identify potential design flaws early in the development process, saving valuable time and resources. Parametric Modeling: Leveraging the power of parametric modeling, I create adaptable and flexible designs that can be easily modified to accommodate design changes or variations. This approach enhances the agility of design iterations and accelerates the development cycle. Collaborative Workflows: My proficiency extends to SOLIDWORKS' collaborative features, facilitating seamless communication with cross-functional teams, stakeholders, and clients. I excel at sharing designs, gathering feedback, and incorporating revisions to ensure alignment with project goals. Design for Manufacturing (DFM): I have a keen understanding of DFM principles and utilize SOLIDWORKS to design products that are optimized for efficient manufacturing processes. This includes considerations for assembly, materials, machining, and production scalability. Assembly Modeling: I am adept at creating intricate assembly models, utilizing SOLIDWORKS' tools for interference detection, motion analysis, and virtual prototyping. This skill enables me to simulate real-world behavior, identify potential clashes, and validate product functionality. Detailed Drawings and Documentation: My expertise extends to producing comprehensive and accurate technical drawings, annotations, and documentation using SOLIDWORKS. This ensures that the manufacturing and assembly processes are well-guided and error-free. Innovation and Problem Solving: I thrive on solving complex engineering challenges and leveraging SOLIDWORKS to develop innovative solutions. Whether it's creating custom components, exploring alternative designs, or addressing unforeseen issues, my SOLIDWORKS proficiency enhances my problem-solving capabilities. Continuous Learning and Adaptability: In the rapidly evolving field of mechanical engineering and software development, I am committed to staying updated with the latest SOLIDWORKS features, enhancements, and best practices. My adaptability allows me to incorporate new techniques and tools into my workflow for continuous improvement.

I am a mechanical engineer. I have experience in many areas such as : robotics, automatic guided vehicles, unmanned ground vehicles, remote control units,medical devices, different manufacturing techn... Read more

I am a mechanical engineer. I have experience in many areas such as : robotics, automatic guided vehicles, unmanned ground vehicles, remote control units,medical devices, different manufacturing techniques, composites materials, electronic hub motors casign designs, clean energy, mold design, 3d printer. I have done many projects in that areas since I started to university and after my graduation. I worked some robotics and mechatronics companies while at universty as a part time after graduation full time. I have designed and produced prototype and final products. I am ready to work from your sketches, descriptions, drawings or images on anything from idea to concept to details. Speciality ; * Mechanical Design * 3D modeling * Manufacturing drawings * Machine design * Sheet metal design * Surface design * Mold design * Product Design * Mechanisms Softwares : * Solidworks (2D/3D) * Catia * Ansys * 3ds-max * Keycreator * Keyshot

I'm a Mechanical Design Enginner with over 4 years of experience, I took part in a number of projects and in my last one I worked with Groupe PSA in designing the front suspension system for an upcomi... Read more

I'm a Mechanical Design Enginner with over 4 years of experience, I took part in a number of projects and in my last one I worked with Groupe PSA in designing the front suspension system for an upcoming car. I have a profound knowledge and experience in product design and my toolbox is rich with softwares such as SOLIDWORKS, CATIA and ANSYS. I understand clients demands and customers needs, working with me can only bring you success and a great co-worker. I don't step back from a challenge and no project is too large for me, if you value high quality work in a short period of time, then you would love working with me. Clients never get bored with my work as I come up with different ideas to make my work appealing to the customers, the trick is : simple but satisfying. You don't have to believe me, pick me and find out!

I am a recent graduate from the University of South Florida with a B.A. in Mathematics. I have 3+ years experience using AutoCAD for 2D and 3D mechanical and architectural drafting. I am eager to get... Read more

I am a recent graduate from the University of South Florida with a B.A. in Mathematics. I have 3+ years experience using AutoCAD for 2D and 3D mechanical and architectural drafting. I am eager to get started in the freelance community and look forward to working with you on your projects.

I have been a full time Mechanical Draftsman in the Perto-Chemical environment from 2008. I have extensive experience in creating manufacturing and repair drawings of the following: Heat Exchangers... Read more

I have been a full time Mechanical Draftsman in the Perto-Chemical environment from 2008. I have extensive experience in creating manufacturing and repair drawings of the following: Heat Exchangers Storage Tanks Drums (Vertical & Horizontal) Columns Reactors Structures Platforms Machined parts

The team started in 1985, working on the design and drawing of ventilating, air conditioning and refrigerating systems. It was registered in 1993 as CIM. We are initially located in Venezuela and ha... Read more

The team started in 1985, working on the design and drawing of ventilating, air conditioning and refrigerating systems. It was registered in 1993 as CIM. We are initially located in Venezuela and have provided consulting mechanical engineering services to a wide range of clients throughout the country. Currently, we try to conduct our work from multiple locations, to different countries, carrying out many of our interactions virtually.

I am Omkar Singh and I am a well Certificated CAD product Designer from CADD centre in May 2019. Basically I am from Haryana (INDIA) Read more

I am Omkar Singh and I am a well Certificated CAD product Designer from CADD centre in May 2019. Basically I am from Haryana (INDIA)

I am a seasoned, Mechanical Design Engineer with work experience of 12 years in many industries and expertise to develop standards for anything from materials to products, specs to process specs, and... Read more

I am a seasoned, Mechanical Design Engineer with work experience of 12 years in many industries and expertise to develop standards for anything from materials to products, specs to process specs, and operating procedures. I would bring to you a great deal of experience in everything and anything required to develop quality products, process planning, verification, and validation of design. Strong domain knowledge in design: Plastics Injection Mould Design, Valve - casting & Forging, Industrial Pumps, Special purpose Machines, Injection molding machines, blow molding machines, extruders, heat exchangers and pressure vessels.

Welcome! You're here because you need an AutoCAD expert who understands your vision and can bring your ideas to life. With over 8 years of experience in mechanical, structural, electrical, civil, and... Read more

Welcome! You're here because you need an AutoCAD expert who understands your vision and can bring your ideas to life. With over 8 years of experience in mechanical, structural, electrical, civil, and architectural design, I am dedicated to helping you achieve outstanding results. Why Choose Me? I specialize in delivering precise, high-quality designs tailored to meet your unique requirements. Your goals and satisfaction are my top priority, and I will work closely with you to ensure the end product not only meets but exceeds your expectations. What I Can Do for You: Mechanical Drawings – Detailed designs for equipment and machinery. Structural Drafting – Robust plans for construction projects. Electrical Layouts – Accurate electrical systems for residential and commercial spaces. Civil Engineering Plans – Site development, drainage, and grading designs. Architectural Drafting – Floor plans, elevations, and 3D modeling for stunning visuals. What Sets Me Apart: Client-Focused Approach – Your vision is the driving force behind every project. I ensure open communication, collaboration, and responsiveness throughout. Accuracy and Efficiency – With an eye for detail and advanced AutoCAD expertise, I deliver precise designs within your timeline. Problem Solver – I proactively address challenges, providing creative solutions that align with your goals. Team Player – When necessary, I’ll coordinate with your team to streamline the workflow and resolve issues seamlessly. Let’s Build Your Success Together! When you work with me, you gain a reliable, innovative, and hardworking partner dedicated to helping you bring your projects to life. Whether it's a one-time task or a long-term collaboration, I’m here to ensure your vision becomes a reality. Let’s connect and discuss how we can make your project a success.

I am mechanical design engineer having 4 year of industrial experience in the field of design. I am having great skill on creo,autocad, solid work, solid work composer. Read more

I am mechanical design engineer having 4 year of industrial experience in the field of design. I am having great skill on creo,autocad, solid work, solid work composer.

I Suhail Ahmad have completed BE Mechanical in 2013, I have total experience in design is 4.5 years , Currently working in Symtronics Automation Pvt Ltd , I have good hands on 2D/3D Modeling, FEA & CF... Read more

I Suhail Ahmad have completed BE Mechanical in 2013, I have total experience in design is 4.5 years , Currently working in Symtronics Automation Pvt Ltd , I have good hands on 2D/3D Modeling, FEA & CFD , i have also good experience on IC Engine Design & Development.

I've been drafting since 2011. My first job was running AutoCAD for a landscape architect at 15 years old. During my high school career I was taught how to use AutoCAD, Inventor, Revit, and to draft b... Read more

I've been drafting since 2011. My first job was running AutoCAD for a landscape architect at 15 years old. During my high school career I was taught how to use AutoCAD, Inventor, Revit, and to draft by hand. During my college career I was taught and certified in Solidworks, revisited Revit, and brushed over 3DS Max before covid. In my spare time I've been teaching myself animation and 3d modeling using blender. Since my childhood I've been drafting inventions, some of which have been made by major companies by coincidence. I have a balanced creative and technical mind that allows me to accel in the mechanical design field.

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching... Read more

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching overseas clients, take the follow-ups, and generate new business. Raywell Studio Pvt Ltd. provides a full range of BIM, Engineering, and Visualization services for a wide variety of Construction Projects. Raywell Studio believes that trust, communication, and collaborative working are key to successful project delivery. We have experience working in a dynamic & complex projects environment and are proud of our strong and lasting relationships with our clients and able to work with key clients closely. As a global BIM expert, we offer 3D-4D-5D and production of Architecture, Structural & MEP Engineering services. We assist some of the International Design-Build and General contracting firms in the USA & Middle East for their projects across the globe. Alice White * www.raywellstudio.com * ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ * https://www.linkedin.com/company/raywellstudio/

I am a Design Engineer for Blue Dolphin Design and Engineering. I have Solidworks experience and training to make parts and assemblies in an organized, modular fashion. This skill allows me to develop... Read more

I am a Design Engineer for Blue Dolphin Design and Engineering. I have Solidworks experience and training to make parts and assemblies in an organized, modular fashion. This skill allows me to develop a detailed CAD model that suits the needs of the customer's product. Once the customer is happy with said model, I can create a reproducible prototype, part or machine using CNC routers, a mill, a lathe, power tools, and 3D printers, etc.

I got into designing and drawing when I was finishing High School. Since then I worked as a freelancer for friends and acquaintances who needed 3D models, blueprints and engineering analysis for their... Read more

I got into designing and drawing when I was finishing High School. Since then I worked as a freelancer for friends and acquaintances who needed 3D models, blueprints and engineering analysis for their own projects. I have experience teaching CATIA, Matlab and Ansys tutorials and I've modelled everything since a simple bolt to a turbofan engine.

Bachelors degree in Construction Management with a minor in Architecture. Very high skill set in AutoCAD. Specialize in residential/commercial construction drawings, Civil Design and mechanical. Worke... Read more

Bachelors degree in Construction Management with a minor in Architecture. Very high skill set in AutoCAD. Specialize in residential/commercial construction drawings, Civil Design and mechanical. Worked with CVS Pharmacy, Market Basket, Costco, TJXX, Charter Foods, and many more.

I am a Mechanical Engineer with 6 years of design experience. My most recent projects have been in the field of Entertainment Engineering, designing theme park show action equipment and custom machine... Read more

I am a Mechanical Engineer with 6 years of design experience. My most recent projects have been in the field of Entertainment Engineering, designing theme park show action equipment and custom machines for live concert touring. Some of these concerts include Tame Impala, Justin Bieber, and The Weeknd. As a design engineer I am constantly challenged to deliver simple solutions to complex problems. I enjoy the journey; to see ideas go from concept to reality is a driver for me. When working with me you will see that I value customer relationships, challenging projects, and continued learning. In my free time I enjoy running, snowboarding in the winter season and playing guitar (not very good though!). I live in Lancaster, PA and am able to meet with customers in eastern PA if if it would benefit the project.

Dear Sir/Madam, Greetings , we ViswakCAD from INDIA, ViswakCAD is a multi discipline Auto CAD drafting firm . We specialize in all kinds of Auto CAD drafting and CAD Conversion services . We a... Read more

Dear Sir/Madam, Greetings , we ViswakCAD from INDIA, ViswakCAD is a multi discipline Auto CAD drafting firm . We specialize in all kinds of Auto CAD drafting and CAD Conversion services . We are currently a member of many successful overseas business teams. We have 23 years experience in CAD drafting and PDF to CAD conversion , Specializing in all type drawings like Architectural Drawings, Residential , Non Residential , Commercial buildings and Building Renovation drawings etc. Various types of Drafting services offered by ViswakCAD are:- Paper to CAD conversion Raster Image to CAD Conversion Scanned documents to CAD Conversion TIFF to CAD Conversion JPGE to CAD Conversion Architectural CAD drafting House plan drafting Sections drawings Piping CAD drafting Parcel Mapping Urban planning as per town planning Cadastral maps HAVC CAD drafting Electrical CAD drafting Mechanical CAD drafting I am glad to have the opportunity to work with you to achieve your drafting goals. Kindly I request you to please give us an opportunity to work for you and work with you. Have a great day.....

- Professional CAD engineer with the excellent skills of Solidworks, NX CAD & AutoCAD. - Specialized in Sheet Metal Works, Mechanical Systems & Machinery Design, Kitchen Equipment Design etc. Read more

- Professional CAD engineer with the excellent skills of Solidworks, NX CAD & AutoCAD. - Specialized in Sheet Metal Works, Mechanical Systems & Machinery Design, Kitchen Equipment Design etc.

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road... Read more

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road to become engineer during my studies at Warsaw University of Technology, faculty of Mechatronics. Studies in Poland are not very practical and I always believed that technical experience is priceless for someone who want to become a professional, and most of all, good engineer so I have decided to start work as a Multi Skilled Maintenance Engineer at MPack where I was responsible for electrical and mechanical maintenance of plant machinery. In September 2011 I have progressed to Service Engineer i SZUGAJEW AGRI. As a service Engineer I was responsible for installation of automated lines for grading and packaging of vegetables and fruits. That job involved working with engineering drawings, electrical and mechanical assembly, start ups and running tests of all the installed machines. After that I have started work for CNS Soultions where I have become expert in using Solid Works 3D and Solid Works Electrical. Since I moved to UK on 7th of January 2015 I have started to work as multi skilled designee engineer. My First Engineering job in UK was in IONEX SG where I was responsible for designing container water treatment installation to remove nitrates from drinking water. (Contract - making drawings of 3D assemblies and part models, 2D documentation, pneumatic installations, selecting components, electrical routing, support project from the beginning to the end) Next, I have started working as electro-mechanical engineer in OPTEK SYSTEMS where I was responsible for designing of specialized laser cutting machinery. (Permanent - full electrical design, making drawings of 3D assemblies and part models, 2D documentation, designing safety systems for laboratories, redesigning of the existing laboratories, engineering support for wire man work, start up of machinery, etc. - 3.5 years) Currently for more than 1 year I am on contract in RACE (Remote Applications in Challenging Environment) United Kingdom Atomic Energy Authority where I am working as System Engineer. I am responsible for designing of Safety Systems, LV distribution, supporting of electrical control design, cable tray layouts drawings, cabinet layouts drawing, etc. Curently I am working as a contractor and my contract is 37.5h/ week I am managing to finish my hours in 3.5 days a week so I have a lot of free time now. That is why I have decided to joint that site and look for more opportunities to use time more effective. I hope someone will be interested in my personal skills. Best Regards Michal Panus

AS degree in drafting and design Highly proficient in AutoCAD and Solidworks Efficient in Revit and Bluebeam Proficient in Microsoft office products Read more

AS degree in drafting and design Highly proficient in AutoCAD and Solidworks Efficient in Revit and Bluebeam Proficient in Microsoft office products